Radial ReAmp Kit

(1 review) Write a Review
Product Code: 3444
Radial ReAmp Kit
We Need A Few Days

This item must be ordered in from the manufacturer. Give us a few days to get it here and heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Radial ReAmp Kit

The Radial ReAmp Kit is a value-priced bundle that contains a Radial X-Amp and a Radial J48 packaged inside a hard plastic lightweight Zebracase. It's everything an engineer, producer, or musician needs to Reamp.

The Radial ReAmp Kit includes everything you need to Reamp in a single case. Start by recording with the industry standard Radial J48 direct box. This active DI is ideal for Reamping as it will not load down the pickups and will deliver the true sound of the instrument without distortion or artifact.

Then Reamp to your hearts content using the Radial X-Amp Reamper. This active Reamper has two buffered outputs for twice the fun! Run two amps at the same time, add pedals… try Reamping bass, drums and keys. Once you get started you will wonder how you ever recorded without it.

Radial J48 Active Direct Box
The Radial J48 is a great sounding active direct box that has been optimized to produce maximum headroom while working within the limited current available from standard 48V phantom power. By employing a unique switching power supply, the Radial J48 is capable of peak transients to nine volts without choking. The result is lower harmonic distortion, half the inter-modulation distortion, and significantly improved dynamics over other DIs. Features include a -15dB pad, 180? polarity reverse, a unique merge function to mix two signals to mono, an 80Hz high-pass rumble filter, and ground lift. Like all Radial products, the Radial J48 is built to handle the abuse on the road and features unique welded I-beam construction for years of trouble free performance.

Radial X-Amp Active Re-amplifier
The Radial X-Amp is an active re-amping device that presents the engineer / producer with a new and innovative creative tool that allows a pre-recorded track from a line-level device to drive two guitar amplifiers or effect pedals simultaneously. This opens the door to exploring new musical sounds and spurs on the creative process.

Radial ReAmp Kit Features

  • Radial J48 Active Direct Box:
    • Ultra low distortion of all types
    • Exceptional headroom & dynamic range
    • Retains instrument's natural sound
    • Powered by 48V phantom
  • Radial X-Amp Active Re-amplifier:
    • Active Reamp® with two outputs
    • 100% discrete class-A signal path
    • Transformer isolated to eliminate noise
    • LED peak indicator and level control

Radial ReAmp Kit Specifications

  • Radial J48 Active Direct Box:
    • Type: Active 48V with switching supply
    • Input Impedance: Unbalanced 220K-Ohms
    • Output Impedance: Balanced 600-Ohms
    • Frequency Response: 10Hz to 80kHz
    • Linear Performance: +/- 0.12dB from 20Hz to 20kHz
    • Total Harmonic Distortion: 0.06% @ 20Hz, 0.005% @ 1kHz
    • Phase Distortion: 0.02º at 1kHz
    • Maximum Input Voltage: 3.12 Volts RMS ( 9V peak )
    • Size: 3.5" wide, 2" high, 5.5" deep
    • Weight: 1kg or 2lbs
    • Construction: Welded 14-gauge steel
    • Finish: Baked enamel coat
  • Radial X-Amp Active Re-amplifier:
    • Audio Circuit Type: 100% discrete class-A
    • Frequency Response: 20Hz ~ 15kHz (± 1.0dB)
    • Signal to Noise Ratio: 88dB below instrument level (-20dBu)
    • Dynamic Range: 119dB
    • Noise Floor: OUT-1 -110dB; OUT-2 -108dBu
    • Maximum Input: +22dBu
    • Total Harmonic Distortion: 0.02% @ -15dBu
    • Inter-Modulation Distortion: 0.02% @ -20dBu
    • Input Impedance: 600O
    • XLR Input: Balanced line-level, AES standard (pin-2 hot)
    • Ground Lift (Input): Disconnects pin-1 at the XLR input
    • Output Level: Adjustable
    • Output Type: High-Z instrument-level, Out-1 direct, Out-2 transformer isolated
    • Polarity: 180º polarity reverse on Out-2
    • Power: +15VDC/400mA adapter included
    • Construction: 14 gauge steel chassis & outer shell, powder-coat finish
    • Size: 3.3” x 5.0” x 2” (84 x 127 x 48mm)
    • Weight: 1.55lb (720g)
    • Shipping Size: 5”x2.75”x10.75” (127x70x273mm)
    • Shipping Weight: 2.6lb (1.18kg)
    • Conditions: For use in dry locations only between 5°C and 40°C

Radial ReAmp Kit Includes

  • Radial J48 Active Direct Box
  • Radial X-Amp Active Re-amplifier
  • Hard Plastic Lightweight Zebracase
  • 3 Year Warranty

Radial ReAmp Kit Downloads

Click here to view all Radial products

1 Review Hide Reviews Show Reviews

  • 5
    huge time-saver

    Learning to reamp has maximized my effectiveness in the studio and my opportunities to loan vintage amps for recording. This kit ensures that both sides of the reamping game (input and output) are up to snuff. Good quality DI included. Definitely somewhat effected by the quality of the AD/DA conversion you use, but useable with even project studio setups.