Home > Recording > Signal Processors >

Radial Shuttle 500-Series Insert Loop

Radial Shuttle
Radial Shuttle
Alternative Views:

List Price: $160.00
Our Price: $139.99

Availability: Usually Ships in 24 Hours
Product Code: 9999-09969


Radial Shuttle 500-Series Insert Loop

The Radial Shuttle 500-Series Insert Loop is designed to offer enormous patching possibilities, allowing you to route non-Radial modules into your Workhorse!

The Radial Shuttle 500-Series Insert Loop is a combination effects insert and routing module that enables you to bring playback tracks, effects and other non-Radial modules into the Workhorse. This opens the doors to tremendous patching options that would otherwise require complex wiring.

The design of Radial Shuttle begins with an input feed via the Workhorse or other 500 series rack. This feeds two front panel insert loops. The first is fully balanced to make interfacing with +4dB studio gear quick and efficient while taking full advantage of the lower noise afforded by a true balanced insert. The second loop is unbalanced for -10dB operation. This is the most common form of insert found in studio workstation environments. A third loop can be accessed via the Omniport for those that are equipped with a Workhorse. Each is equipped with an individual insert on-off selector that allows the effects to be compared.

Where the Radial Shuttle really begins to get interesting is when using the Workhorse for real-time playback. A feed from the recorder is sent to the Radial Shuttle where the program track can be auditioned at the same time as a new recording track without latency of any kind. One simply routes the mic preamp and shuttle to one of the 8 channels while auditioning via the main, monitor or headphone outputs.

The Radial Shuttle makes connecting effects to your 500 series rack quick, easy and super effective..

Radial Shuttle 500-Series Insert Loop Features

  • Lets you connect any module to the Workhorse mix buss
  • Two front panel effects loops for handy patchbay convenience
  • Individual insert switches for comparing wet dry signals
  • Third loop via Omniport for remote studio patchbay interface
  • One balanced and one unbalanced loop
  • Front panel connectivity and controls
  • Workhorse mix buss drive circuit
  • Direct front inputs for zero-latency recording
  • Adds extra dimension to your 500 series rack
  • Brings older modules up to latest spec
  • Lets you connect modules in more ways
  • Low cost add-on that makes sense

Radial Shuttle 500-Series Insert Loop Applications

  • Balanced Send and Return - Use the Radial Shuttle to interface balanced studio devices or simply patch in without having to repatch or reach in behind equipment.
  • Unbalanced Send and Return - Combine the Radial Shuttle with your Workhorse to interface unbalanced studio effects with the ease of front panel connectivity.
  • Overdubbing in Real Time -The Radial Shuttle makes it easy to overdub tracks without digital latency. Plug into the Workhorse with a mic preamp or channel strip and start recording!

Radial Shuttle 500-Series Insert Loop Specifications

  • Frequency Response: 20Hz to 20KHz, 0.5dB
  • Dynamic Range: >130dB
  • Noise: -125dBu
  • Gain: 0dB
  • Maximum Input: +22dBu to *Workhorse buss - Max Input
  • Input Impedance: 20K Ohms
  • Omniport Function: Unbalanced loop
  • Power Requirement: 20mA
  • Shipping Size: 9 x 6.5 x 2 (inches)
  • Weight: 1.5 lbs. (0.7 kg)
  • Conditions: For use in dry locations only between 5C and 40C

Radial Shuttle 500-Series Insert Loop Includes

  • Radial Workhorse Shuttle Unit
  • User Guide
  • 3 Year Warranty

Radial Shuttle 500-Series Insert Loop Downloads

Click here to view all Radial products

You may also need...
Radial Workhorse 500-Series Summing Rack
Our Price: $1,399.99

Radial Workhorse