Home > Rack Gear > 500-Series > 500-Series Modules >

Radial JDV 500-Series Active Direct Box

Radial JDV-LB
Radial JDV-LB
 
List Price: $500.00
Our Price: $449.99


Availability: Usually Ships in 24 Hours
Product Code: 9999-07434

 

Radial JDV 500-Series Active Direct Box

The Radial JDV 500-Series Active Direct Box is a 100% discreet class-A instrument direct box with a unique feed-forward design that does not employ any form of traditional negative feedback phase cancellation techniques whatsoever to stabilize the input circuit. This innovative design captures the very essence of instrument and delivers the natural tone without artifact.

The Radial JDV 500-Series Active Direct Box is equipped with instrument input plus a buffered thru-put that can be used to drive 50 feet of high-Z cable to the amplifier. Radial's innovative Drag Control load correction allows the user to apply the desired load on the pickup for the most natural rendering. This can be bypassed for a 4 meg-ohm input for finicky piezo pickups.

The Radial JDV is augmented with an adjustable high-pass filter designed to remove low-end resonance to help clean up the mix. The Radial JDV Omniport is set up as a hi-Z output to drive a tuner, a second amplifier or effects.

This makes the Radial JDV the ideal front end interface for bass guitar, acoustics and any other direct to recorder instrument you may encounter.

Radial JDV 500-Series Active Direct Box Features

  • 100% discrete class-A active direct box
  • Feed forward design no negative feedback
  • Drag Control load correction for natural tone
  • Huge 30-Volt rails for exceptional headroom

Radial JDV 500-Series Active Direct Box Specifications

  • Technical Specs:
    • Audio Circuit Type: Active, class-A, non-feedback circuit
    • Frequency Response: 20Hz ~ 20kHz ( 1 dB)
    • Signal to Noise Ratio: 86dB @ 0dBm output
    • Dynamic Range: 104dB
    • Noise Floor: -86dBu
    • Equivalent Input Noise: -89dBu
    • Maximum Input: +16dBu
    • Phase Deviation: +1 at 20Hz | 0 at 1kHz | -7 at 20kHz
    • Total Harmonic Distortion: 0.008% @ -22dBu
    • Inter-Modulation Distortion: XLR out: 0.019%; AUX outs: 0.005% (DIN standard)
    • Input Impedance (Drag on): Variable from 10k ~ 1 mega-?, unbalanced
    • Input Impedance (Drag off): 3.9 mega-? for passive piezo transducers
    • Output Impedance: XLR out: 600?; " AUX outs: 1k?
  • Features:
    • Output Pad: -15dB
    • Polarity: 180 signal polarity reverse switch
    • Ground Lift: Disconnects pin-1 at XLR output
    • Low-Cut Filter: -3dB @ 75Hz
    • High-Cut Filter: -3dB @ 8kHz
    • Speaker Pad & Filter: -30dB pad and band-pass filter
    • XLR Configuration: AES standard (pin-2 hot)
  • General:
    • Power: +42VDC external supply included
    • Construction: 14 gauge steel chassis and outer shell
    • Finish: Durable powder coat
    • Size: 5" x 6.25" x 2" (127 x 159 x 51mm)
    • Weight: 2.80lbs (1.28 kg)
    • Conditions: For use in dry locations only between 5C and 40C

Radial JDV 500-Series Active Direct Box Includes

  • Radial Workhorse JDV-LB Active Direct Box
  • 3 Year Warranty

Radial JDV 500-Series Active Direct Box Downloads

Click here to view all Radial products


You may also need...
Radial Workhorse 500-Series Summing Rack
Our Price: $1,399.99

Add
Radial Workhorse