Focusrite RedNet A8R Network Interface
The Focusrite RedNet A8R Network Interface is a 1U, 8x8 analogue line-level I/O interface for any Dante audio-over-IP network. Featuring network and power supply redundancy, RedNet A8R is the ideal choice for providing analogue I/O in many critical-path applications, whether in Post Production, Broadcast, Live Sound or the Recording Studio.
The Focusrite RedNet A8R Network Interface offers eight channels of Dante-networked A-D and D-A conversion, with network & PSU redundancy. High-quality conversion with up to 119dB of dynamic range is provided through two rear-panel DB25 connectors while an additional pair of AES3 I/O is provided through male and female XLR for added flexibility. Word Clock I/O on BNC connectors allows external devices to clock to Focusrite RedNet A8R, or alternatively allows Focusrite RedNet A8R to act as a network clock grand master slaved to external input. Power is supplied through a pair of locking IEC power inlets, and network connections are provided with a pair of locking Neutrik etherCON connectors; providing redundant operation or daisy-chained operation.
Focusrite RedNet A8R Network Interface Features
- Eight channels of high-quality line-level analogue I/O
- 24-Bit precision Focusrite conversion up to 192kHz
- 119dB Dynamic range, flat from 20Hz - 20kHz, +/-0.15dB
- Internally balanced throughout
- Dante-based remote-controlled audio-over-IP connectivity
- Dual power supplies and network connections with full power and network redundancy, including latching connectors for maximum reliability
- Word Clock I/O and DARS for increased flexibility, plus an additional two channels of AES/EBU I/O
- Analogue I/O to AES59 standard on DB25 connectors
- Comprehensive front-panel indicators
- Software-based routing and control, no hardware patching required
Focusrite RedNet A8R Network Interface Specifications
- Line Input:
- 0 dBFS Reference Input Levels: Elements 18 or 24dBu (Switchable)
- Frequency Response Inputs: 20Hz – 20kHz ± 0.1dB
- THD N Inputs:
- EIN: -96dBu A-Weighted (Typical)
- Signal-to-Noise Ratio: 120dB A-Weighted (Typical)
- Converter Dynamic Range: 120dB A-Weighted (Typical), 10Hz – 20kHz
- Line Outputs:
- 0 dBFS Reference Levels: 18 or 24dBu (Switchable)
- Frequency Response: 20Hz – 20kHz ± 0.1dB
- THD N:
- Noise in Presence of Signal: -94dBu A-Weighted (Typical)
- Dynamic Range: 118 dB A-Weighted (Typical)
- Crosstalk:
- Input to Output or Input:
- Output to Input or Output:
- Digital Input Sample Rate Converters:
- Sample Rate Range: 32kHz to 216kHz
- Gain Error: -0.3dB
- Dynamic Range Inputs: >138dB
- Latency: 11 to 45 Samples (Network and Sample Rate Dependent)
- Digital Performance:
- Supported Sample Rates: 44.1 / 48 / 88.2 / 96 / 176.4 / 192 kHz (-4 / -0.1 / 0.1 / 4.167) at 24 Bit
- Clock Sources: Internal or from Dante Network Master
- External Word Clock Range: Nominal Sample Rate ±7.5
- Rear Panel Connectivity:
- Line Inputs: 1 x DB-25 Connectors Analogue Outputs
- Line Outputs: 1 x DB-25 Connectors
- Channel Count: 2 x 2 AES/EBU Channels
- Input (Optional DARS): 1 x Female XLR
- Output: 1 x Male XLR
- Word Clock Input: 1 x BNC 75 ohm Port (Switchable Termination)
- Word Clock Output: 1 x BNC 75 ohm Port
- PSU: 2 x Internal, 100-240V, 50/60Hz, Consumption 24W
- Network: 2 x EtherCON NE8FBH, Also Compatible with Standard RJ45 Connectors
- Front Panel Indicators:
- Primary PSU (A): Green LED
- Secondary PSU (B): Green LED
- Primary Network: Green LED
- Secondary Network: Green LED
- Network Locked: Green LED
- Sample Rate: Orange LED for Each: 44.1 kHz, 48 kHz, x2, x4
- Pull Up/Down: Orange LED
- Channel Signal Level: Green LED (> -42dB), Orange LED (> -6dB) and Red (> 0dB)
- AES/EBU Signal Indicators: 2 I/O Signal Indicator LEDs
- Clock Source: Orange LED for Each Internal, Word Clock and DARS
- Network Modes:
- Redundant: Allows Unit to Connect to Two Independent Networks
- Switched: Connects Both Ports to Integrated Network Switch Allowing Daisy-Chaining of Devices
Focusrite RedNet A8R Network Interface Includes
- Focusrite RedNet A8R Network Interface
- 2 x IEC AC Mains Cables
- 2 x IEC Mains Cable Retaining Clips
- Safety Information Cut Sheet
- RedNet Getting Started Guide
- Product Registration Card, Which Provides Links to:
- RedNet Control
- RedNet PCIe Drivers (Included with RedNet Control Download)
- Audinate Dante Controller (Installed with RedNet Control)
- Dante Virtual Soundcard (DVS) Token and download instructions
- User Guide
- 3 Year Warranty
Focusrite RedNet A8R Network Interface Downloads
No review yet, Be first to Write a Review