Audio Technica AT2022 X/Y Stereo Microphone
The Audio Technica AT2022 X/Y Stereo Microphone is a condenser microphone designed for stereo recording. Two unidirectional condenser capsules in an X/Y configuration pivot to allow for narrow 90° or wide 120° stereo operation.
The Audio Technica AT2022 X/Y Stereo Microphone incorporates unique pivoting electret condenser capsules for ultimate flexibility. The capsules also fold flat for storage and transportation. Designed for general stereo recording and field sound capture, the Audio Technica AT2022 provides the spatial impact and realism of a live sound field.
Audio Technica AT2022 X/Y Stereo Microphone Features
- X/Y stereo microphone with unique pivoting electret condenser capsules for ultimate flexibility
- Provides the spatial impact and realism of a live sound field
- Battery operation allows use with most recording devices
- Switchable low-frequency roll-off minimizes pickup of unwanted low-frequency noise
- User-selectable 90° or 120° stereo operation for narrow or wide pickup patterns
- Ideal for general stereo recording and field sound capture
- Excellent channel separation
- Included fuzzy windscreen offers excellent wind protection
Audio Technica AT2022 X/Y Stereo Microphone Specifications
- Elements: Fixed-Charge Back Plate, Permanently Polarized Condenser
- Polar Pattern: X/Y Stereo
- Frequency Response: 20–20,000 Hz
- Low Frequency Roll-Off: 150 Hz, 6 dB/Octave
- Open Circuit Sensitivity: -41 dB (8.9 mV) re 1V at 1 Pa
- Channel Balance:
- Impedance: 200 Ohms
- Maximum Input Sound Level: 122 dB SPL, 1 kHz at 1% THD
- Dynamic Range (Typical): 103 dB, 1 kHz at Max SPL
- Signal-To-Noise Ratio: 75 dB, 1 kHz at 1 Pa
- Battery Type: 1.5V AA/UM3
- Battery Current / Life: 1.2 mA / 500 Hours Typical (Alkaline)
- Switch: Off, On/Flat, On/Roll-Off
- Weight: 270 g (9.5 oz)
- Dimensions: 192.0 mm (7.56") Long, 65.0 mm (2.56") Maximum Head Diameter, 21.0 mm (0.83") Body Diameter
- Output Connector: Integral 3-Pin XLRM-Type
Audio Technica AT2022 X/Y Stereo Microphone Includes
- Audio Technica AT2022 X/Y Stereo Microphone
- Audio Technica AT8405a Stand Clamp for 5/8"-27 Threaded Stands
- Fuzzy Windscreen
- 1.5V AA/UM3 Battery
- Soft Protective Pouch
- 2 Year Warranty
Audio Technica AT2022 X/Y Stereo Microphone Downloads
Special Note
The Audio Technica AT2022 X/Y Stereo Microphone is designed for battery operation only. Do not attempt to use when phantom power is present. Possible damage to the microphone may result.
No review yet, Be first to Write a Review