Home > Rack Gear > 500-Series > 500-Series Power Supplies >

  Radial Workhorse WM8 Mixer Module for Workhorse

Radial WM8
Radial WM8
Save 10% on this product today by using discount SAVETEN during checkout!
List Price: $850.00
Our Price: $749.99

Availability: Usually Ships in 24 Hours
Product Code: 9999-10184


Radial Workhorse WM8 Mixer Module for Workhorse

Radial Workhorse WH-M8 Mixer Module, the summing mixer option for the Radial Workhorse WH-R8 Rack.

Radial Workhorse WH-M8 Mixer Module Details

The Radial Workhorse WH-M8 Mixer Module is the summing mixer section of the Workhorse that fits into the Radial Workhorse WH-R8 Rack.

The Radial Engineering Workhorse 5000 is a three-rackspace unit that accommodates up to eight 500 Series modules. Besides providing 16VDC and 48-volt phantom power for each of its eight module slots and input, direct out and summing connections on 8-channel D-25 sub jacks (for direct-to-DAW or P.A. feeds), each module has 1/4 inch and XLR I/O, mono/stereo link switches and a mix/feed switch for internal patch routing of the output to feed the next module or to the master output section.

OmniPort connectors on each input provide module designers with custom options, such as integrating keying inputs, a footswitch port or a tuner output on a direct box/instrument preamp. Designed to allow on-the-spot mixing or stereo recording, the mix bus section has pan/level pots and mute switches for each module, rotary main out and aux out controls and a headphone monitoring section.

The rear panel has XLR and 1/4 inch aux and transformer-isolated main outputs, insert jacks for the master outs and bus in/out jacks for connecting additional sources and/or multiple Workhorse units.

The Workhorse derives its main power from a custom-designed universal switching supply that delivers more juice than most others. Its external power supply eliminates issues with hum due to magnetic coupling between power supply transformer and the plug-in module's internal transformer. As an extra measure, additional power filtering has been incorporated to eliminate noise. The power supply is also auto-tracked, which means that should a module fail, other modules will be protected against harmful voltage swings that could potentially cause damage.

"The Workhorse is one of the most exciting products we have ever developed," says Radial President Peter Janis. "Not only has it forced us to challenge ourselves with historic compatibility, but it's forced us to go back to the drawing board and redesign several modules that were essentially set to go. But once you get into a project of this magnitude, you really cannot go backwards. We truly believe that the Workhorse will set a new standard in analog audio interfacing. We plan to openly publish our design specifications to enable other module producers to take full advantage of the feature-set we've incorporated into the Workhorse. Ultimately, if it's easy to use, fun and spurs on creativity, we will have achieved our objectives."

Like all Radial products, the Workhorse is made from 14-gauge steel and finished in a rugged baked enamel finish.

Click here to view all Radial products

You may also need...
Radial Workhorse WR8 500-Series Rack
Our Price: $749.99

Radial WR8