The Fredenstein Bento 6S 500-Series Rack is a high performance power rack for Fredenstein or API 500-Series modules. Ideal for any studio or recording setup needing stable power, the unit can accept a maximum of 6 modules.
The Fredenstein Bento 6S 500-Series Rack features several important upgrades compared with third party products:
- Universal power supply has mains voltages ranging from 90V AC to 240V AC, 50 to 60 Hz.
- Increased output currents as +/-16V DC 1.6A and +48V DC 0.15A, 533mA per slot which is about 3 times more than the standard calls for.
- The Fredenstein Bento 6S power supply is also designed for extremely low noise largely due to state of the art switching regulators that operate above 200 kHz, which is typically higher in frequency than most conventional switching regulators. They also follow “green” guidelines that minimize power consumption to only what is needed.
Other features include the capability to drive very large capacitive loads. Most other switching supplies might oscillate if presented with large capacitors to charge. The Fredenstein Bento 6S ramps up in a controlled manner (typically 0.2 seconds). Also unlike most +/- switching regulators, both the +16V and -16V are regulated separately and provide separate current protection.
Auxiliary Audio Inputs and Outputs
- Built-in Audio Routing: Modules can be daisy-chained by simply flipping switches on the back- panel.
- Compressor buss linking: Compressor modules can be linked by engaging switches on the back- panel as well.
- Multi-Layer Backplane: Increased signal integrity and lower noise floor.
- Ground-lift switch: In case of ground loops, the audio ground and the protective ground can be disconnected. Please use only if absolutely necessary.
Fredenstein Bento 6S 500-Series Rack Features
- Ideal for for any studio or recording setup needing stable power for their 500-Series modules
- 6-Slot 500 Series rack
- Module Power is ±16V DC 1.6A, +48V DC 0.15A
- Universal power supply accepts voltages from 90V to 240V AC, 50 to 60Hz
- Onboard audio routing
- Compressor bus linking
- Auxiliary audio inputs and outputs
- Multilayer backplane
- Ground-lift switch
- Carry handle and 2 sets of rubber feet for convenient portability
Fredenstein Bento 6S 500-Series Rack Specifications
- Input Voltage: 90V AC to 240V AC, 50 to 60 Hz
- Output Voltages: +16V DC 1.6A, -16V DC 1.6A, +48V DC 0.15A
- Power Consumption: Max 90W
- Dimension (L x H x D): 300mm x 135mm x 190mm (Without Handle and Feet), 350mm x 145mm x 190mm (Including Handle and Feet)
- Weight: 3.8kg (NW) ; 4.8kg (GW)
Fredenstein Bento 6S 500-Series Rack Includes
- 1 x Fredenstein Bento 6S 500-Series Rack
- 1 x IEC Cable
- 1 Year Warranty
Videos Hide Videos Show Videos
11 Reviews Hide Reviews Show Reviews
-
Great Product, Excellent Customer Service
Jan 27th 2016After some initial hiccups in getting a 2 slot module in slots 1 and 2, and back an forth with Ryan and Fredenstein, this rack is wonderful. The construction is solid, and the power supply is quiet. I appreciate that it has an internal supply instead of an external one. The unit was well packed, and shipped quickly. Customer service was excellent and provided quick responses to my sometimes silly questions. I look forward to purchasing more 500 series modules and other equipment from Front End Audio.
-
Great so far
Nov 20th 2014The Bento 6 looks fantastic and has great build quality and amazing features for a power supply. XLR auxiliary ins and outs on each channel, channel linking, and comp bus make this the best 500 series power supply for your money. Really can't be beat for the price. This is of course assuming that their quality control is up to par. Time will tell!
Write a Review
Sign Up for exclusive sales and offers!