Front End Audio acquires previously owned gear through our Buy-Back program. You can purchase used gear at a great price but there are no manufacturer warranties with these items. These items have been inspected and/or tested by our staff to make sure each one is in working condition and comes with our commitment to service. This Fredenstein Bento 10S 500-Series Rack looks and functions perfectly. It includes everything as if you were to buy it new.
The Fredenstein Bento 10S 500-Series Rack is a high-performance 500-Series chassis that accommodates 10 modules in a 3-space 19-inch rackmount form factor. Designed for your studio and recording setup, it gives you the power, performance, and features you need in a 500-Series rack. The Fredenstein Bento 10S 500-Series Rack is a high performance module carrier for Fredenstein Series 500 modules or API-500 compatible plug-in cards in two space 19 inch rack format. The unit accepts a maximum of 10 modules. The Bento 10S power supply is also designed for extremely low noise largely due to state of the art switching regulators that operate above 200 kHz, which is typically higher in frequency than most conventional switching regulators. They also follow “green” guidelines that minimize power consumption to only what is needed. Other features include the capability to drive very large capacitive loads. Most other switching supplies might oscillate if presented with large capacitors to charge. The Fredenstein Bento 10S ramps up in a controlled manner (typically 0.2 seconds). Also unlike most +/- switching regulators, both the +16Vand -16V are regulated independently and provide separate over current protection.
The Fredenstein Bento 10S features several important upgrades compared with third party products:
- Universal power supply: accepting mains voltages from 90V AC to 240V AC, 50 to 60 Hz.
- Increased output currents: +-16V DC 3.2A and +48V DC 0.3A
- Built-in Audio Routing: Modules can be daisy-chained by simply flipping switches on the back-panel.
- Compressor buss linking: Compressor modules can be linked by engaging switches on the back-panel as well.
- Multi-Layer Backplane: Increased signal integrity and lower noise floor.
- Ground-lift switch: In case of ground loops, the audio ground and the protective ground can be disconnected. Please use only if absolutely necessary.
Fredenstein Bento 10S 500-Series Rack Features
- 19-inches, 3U Space
- 10 Slots
- Advanced Routing
- Universal Power Supply (90Vac to 240Vac, 50Hz to 60Hz)
- Low Noise Floor
- Ground Lift Switch
Fredenstein Bento 10S 500-Series Rack Specifications
- Input Voltage: 90V AC to 240V AC, 50 to 60 Hz
- Output Voltages: +16V DC 3.0A, -16V DC 3.0A, +48V DC 0.25A
- Power Consumption: max. 150W
- Dimension (L x H x D): 480mm x 140mm x 190mm
- Weight: 4.5kg (NW) ; 6.0kg (GW)
Fredenstein Bento 10S 500-Series Rack Includes
- Fredenstein Bento 10S 500-Series Rack
- IEC Cable
No review yet, Be first to Write a Review
Write a Review
Sign Up for exclusive sales and offers!