Earthworks M50 Omnidirectional Measurement Microphone

Earthworks

(No reviews yet) Write a Review
Product Code: 1708
$1,299.00
Adding to cart… The item has been added
In Stock, Usually Ships In 24 Hours

This item is in stock and typically ships in 1 to 2 business days. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Got Questions? Need Support?

888-228-4530 Contact Us!

The Earthworks M50 Omnidirectional Measurement Microphone is a professional mic intended for large room calibration. The ultra wide frequency response of 3Hz to 50kHz is flat throughout the entire spectrum and results in accurate room calibration using Smaart, MLSSA, SIMM and TEF based systems.

The Earthworks M50 Omnidirectional Measurement Microphone is a precision engineered 50kHz omnidirectional measurement microphone ideally suited for acoustical measurements including high-end loudspeaker design and quality control, scientific research, measurements of ultrasonic or subsonic transducers, or any application where an extremely accurate free-field measurement microphone is required.

Known for its accuracy, reliability and consistency, the Earthworks M50 is the top of the line measurement microphone with extraordinary impulse response for those who have stringent requirements and demand the very best. The Earthworks M50’s audio performance is unparalleled. It has an ultra wide flat frequency response that extends from 3Hz to 50kHz and is flat throughout the entire spectrum. Its omnidirectional polar response exceptionally consistent, providing an even coherent response a the direct and off-axis sections of the microphone capsule.

The Earthworks M50 has a 140dB SPL rating without distortion and no handling noise. With temperature compensated electronics, the Earthworks M50 was built to deliver repeatable results no matter what the environment. Lightning fast impulse response and linear phase response make the Earthworks M50 ideal for use with high-quality FFT-based real-time audio system measurement software like SMAART™, SIM™, REW™, Electroacoustics Toolbox™, FuzzMeasure™ and others, as well as for use in PA system alignment and loudspeaker design.

Every Earthworks M50 is individually hand-tuned and tested and is delivered with its own printed frequency response chart. An Electronic Calibration File (ECF) is generated for each microphone during final testing, and can be downloaded free of charge after product registration.

Earthworks M50 Omnidirectional Measurement Microphone Features

  • 50kHz Flat frequency response
  • Ideally suited for acoustical measurements that require extended frequency response, including high-end loudspeaker design and quality control, scientific research, measurements of ultrasonic or subsonic transducers, or any application where an extremely accurate free-field measurement microphone is required
  • Top of the line measurement microphone with extraordinary impulse response for those who have stringent requirements and demand the very best
  • Provides laboratory grade accuracy
  • Omnidirectional polar pattern
  • Flat frequency response, fast impulse response and exceptional polar characteristics
  • Used by SMAART™, MLSSA™, Spectrafoo™, TEF™ and RTA in addition to acoustic measurement systems manufactured by dbx, DEQX and others
  • Meets or exceeds ANSI Type 1 and applicable IEC 61094 requirements
  • Each M Series microphone is delivered with its own calibration chart providing its individually measured open-circuit sensitivity and the frequency response curve
  • Electronic Calibration File available
  • Operating temperature range is -20 deg C to +60 deg C ( -4 deg. F to 140 deg. F)
  • Storage temperature range is -40 deg C to +80 deg C ( -40 deg. F to 176 deg. F)
  • Humidity is up to 90%
  • Re-calibration recommended every five (5) years

Earthworks M50 Omnidirectional Measurement Microphone Applications

  • Foley Recording
  • Measurement
  • Room/Ambient

Earthworks M50 Omnidirectional Measurement Microphone Specifications

  • Frequency Response: 3Hz to 50kHz ±1/-3dB
  • Polar Pattern: Omnidirectional
  • Sensitivity: 34mV/Pa (-29dBV/Pa)
  • Power Requirements: 24 – 48V Phantom, 10mA
  • Max Acoustic Input: 140dB SPL
  • Output: XLR (pin 2+)
  • Output Impedance: 65O balanced (between pins 2 & 3)
  • Min Output Load: 600O between pins 2 & 3
  • Noise: 20dB SPL equivalent (A weighted)
  • Dimensions L x D: 229mm x 22mm (9 x .860 inches)
  • Weight: .5 lb. (225g)

Earthworks M50 Omnidirectional Measurement Microphone Includes

  • Earthworks M50 Omnidirectional Measurement Microphone
  • ADP1 1/2" Calibrator Adapter
  • MC1 Microphone Clip
  • User Manual
  • Manufacturer Warranty

No review yet, Be first to Write a Review