ART HeadAmp 6 Pro Headphone Amplifier
The ART HeadAmp 6 Pro Headphone Amplifier is a six-channel stereo headphone amplifier that includes a six-channel auxiliary input section that can be used to provide the popular “More-Me” function on each headphone mix. In addition to the HeadAmp 6, the HeadAmp 6 PRO offers adjustable bass and treble options along with AUX inputs located on the back of the unit instead of the front.
The ART HeadAmp 6 Pro Headphone Amplifier's each output channel also features a dual function BALANCE control which will pan between LEFT & RIGHT sides of the main signal bus, or vary the MIX between the main signal bus and the AUXILIARY input for that respective channel.
Bass and treble controls are included on each output channel for fine-tuning the tone. Outputs include both front and rear panel stereo 1/4-inch TRS jacks for ease of installation and quick patching capability. Two MONO select buttons on each channel select between four operating modes; 1) Stereo, 2) Mono Left, 3) Mono Right, 4) Mono Both (Left & Right) for versatile monitoring solutions.
The main outputs for each channel of the ART HeadAmp 6 Pro Headphone Amplifier are rear mounted stereo TRS jacks and are wired in parallel with the corresponding output jacks on the front panel. Front panel, rear panel, or both front and rear panel outputs can be used simultaneously to drive headphones or be used as feeds to additional headphone amplifiers in a distributed audio network.
Input options include XLR and 1/4-inch TRS balanced inputs with matching “Thru” jacks for bridging multiple ART HeadAmp 6 Pro units. An additional front panel stereo 1/4-inch TRS jack for quick patch override of the rear panel inputs is included for quick insertion of any stereo source. Eight-segment LED level indicators provide visual feedback of the signal level on all channels as well as the main signal bus.
ART HeadAmp 6 Pro Headphone Amplifier Features
- Six channels with separate bass & treble controls
- Front and rear panel output jacks
- XLR & 1/4-inch TRS balanced inputs
- Operates in Stereo, Mono (Source Left), Mono (Source Right) or Summed Mono (Source Left & Right)
- Auxiliary front mounted separate source input
- 8-Sement LED level indicators on all channels & bus
ART HeadAmp 6 Pro Headphone Amplifier Specifications
- Maximum Input Level: +21.5dBu
- Input Impedance: 40k O Balanced
- Maximum Output Level: 500 mW @ 32 O
- Maximum Gain: 25.6 dB (Tone Controls Set Flat)
- Frequency Response: 20 Hz – 50 KHz +0, -2dB
- CMMR: 40dB
- Dimensions: 1.75 x 19 x 7.5 in / 44.5 x 482 x 190mm
- Weight: 6.8 lbs (3.1 kg)
- Power Requirements: 105-125 VAC AC 60 Hz
ART HeadAmp 6 Pro Headphone Amplifier Includes
- ART HeadAmp 6 Pro Headphone Amplifier
- Owners Manual
- 3 Year Warranty
ART HeadAmp 6 Pro Headphone Amplifier Downloads
1 Review Hide Reviews Show Reviews
For a situation where you don't need more-mes, this unit is hard to beat. Handles input over a pair of 1/4" TRSs, or a single one if your interface only has headphone outputs. Allows you to be creative with limited means, too: if you need two cue mixes and you only have a single stereo headphone out, hard-pan the contents of each mix and feed to the single 1/4" TRS input. For everyone who needs the mix on the left, hit the "Mono L" button, and for everyone who needs the mix on the right, "Mono R." Not the ideal situation, but it's nice to have in a bind! Not to mention that the output level is strong, and has low noise up the very tip-top of the gain range.