Shure Beta 98H/C Condenser Microphone

(No reviews yet) Write a Review
Product Code: 2954
Shure Beta 98H/C
In Stock, Usually Ships In 24 Hours

Shure Beta 98H/C Clip-On Condenser Instrument Microphone

Shure Beta 98H/C Clip-On Condenser Instrument Microphone

Shure Beta 98H/C Clip-On Condenser Instrument Microphone Details

The Shure Beta 98H/C (also available as the WB98H/C for use with wireless systems) is a premium cardioid condenser instrumental microphone that clamps onto the bell of wind instruments or onto the rim of percussion instruments. The integrated gooseneck and ratcheting swivel joint allows the microphone to be easily positioned and secured in place, and an isolation shock-mount reduces the transmission of instrument 'key noise' and other mechanical noise. A gooseneck angle brace is included to provide better retention of the microphone placement during more active performances.

The Beta 98H/C features transformerless preamplifier circuitry, which improves linearity across the full frequency range. The pickup pattern of the Beta 98H/C provides high gain-before-feedback and excellent rejection of unwanted noise. Its high maximum sound pressure level (SPL) enables it to handle the extreme demands of brass, woodwind and percussion instruments.

*Where phantom power is not available, use the Shure WB98H/C with the MX1BP battery-powered preamplifier.

Shure Beta 98H/C Clip-On Condenser Instrument Microphone Specifications

  • Type: Condenser (electret bias)

  • Polar Pattern: Unidirectional (cardioid)

  • Frequency Response 20 to 20,000 Hz.
  • Output Impedance 1200 _
  • Output Level (0 dB = 1 volt per Pascal)
  • Open Circuit Voltage: â?"56.5 dB (1.5 mV)
  • Output Clipping Level (at 1kHz, THD < 1%) -9 dBV (0.35 V)
  • Maximum SPL 143.5 dB
  • Dynamic Range (maximum SPL to A-weighted noise level) 112.5 dB
  • Output Noise (equivalent SPL) 31 dB typical, A-weighted
  • Signal-to-noise ratio 63 dB at 94 dB SPL (IEC 651)
  • Polarity Positive pressure on microphone diaphragm produces positive voltage on pins 3 and 4 with respect to pin 1 (ground).
  • Recommended Operating Voltage 5 V (pin 2 to pins 3 and 4)
  • Net Weight Microphone w/cable and mini-connector (TA4F): 65 g (2.3 oz.)

Shure Beta 98H/C Clip-On Condenser Instrument Microphone Applications

  • Brass/Saxophone

  • Woodwinds

  • Strings

  • Percussion

Whatâ??s Included

  • Snap-on windscreen

  • Storage bag

  • Gooseneck angle brace
  • Cable management device

Nice Product

this is nice product

No review yet, Be first to Write a Review