The Royer R-12 Active Ribbon Microphone Package pulls together both the Royer R-12 Active Ribbon Microphone with it's most compatible mount mate, the Royer RSM-SS24 "Sling-Shock" Shock Mount.
The R-12 is capable of extremely natural sound acquisition, making the microphone an exceptional choice for capturing an audio source just like it sounds to the ear with extraordinary sonic accuracy. Royer ribbons have always been known for their ability to deliver a warm sound capable of capturing the elusive nuances of the original performance. R-12 takes this capability to the next level. Of particular note, the R-12 uses the same 2.5 micron ribbon element found in the company’s legendary R-121 microphone. This feature delivers Royer’s well-known high SPL (Sound Pressure Level) capabilities measured at 160dB @ 1kHz. With its switchable -15dB pad, the R-12 can deliver excellent headroom for louder program material such as drums and dimed electric guitars. This important feature eliminates any potential for headroom-related distortion on even the loudest sound sources.
Another notable feature of the new R-12 microphone is its onboard active electronic circuitry, which significantly increases output level for quieter sound sources such as acoustic instruments and vocals. R-12’s active electronics consistently put a perfect load on the ribbon element, enabling the microphone to deliver its full sonic potential. The R-12 is also outfitted with a switchable High Pass filter precisely tuned to reduce low end proximity buildup, making this microphone a perfect choice for capturing louder vocal performances and close-miking of instruments and loudspeaker cabinets. Completing its rich feature set, the R-12 houses an internally shock-mounted ribbon transducer, which helps to protect the ribbon element while also reducing handling noise. Combined with its built-in triple-layer wind screen, the microphone’s ribbon is effectively protected against plosives and other wind-related noise.
Royer RSM-SS24 "Sling-Shock" Shock Mount
The Royer RSM-SS24 "Sling Shock" Shock Mount introduces a completely new technology that does away with elastic bands, rubber bungee cords or synthetic bushings and is designed for the most critical applications. The Sling-Shock is a microphone shock mount, which provides excellent isolation between a microphone and the microphone stand. The innovative suspension system reduces induced distortion by keeping out unwanted vibration and random low-frequency disturbances commonly characterized as “rumble”. By design, the Sling-Shock is essentially maintenance free. Rubber and similar materials commonly found in microphone suspension systems have been completely eliminated. The microphone clutching mechanism offers greater adaptability by allowing critical position adjustments to the microphone. A knurled lock-down knob secures the microphone in place, with a soft cotton interior chamber providing a non-abrasive grasp of the microphone.
Royer R-12 Active Ribbon Microphone Specifications
- Acoustic Operating Principle: Electrodynamic pressure gradient with active electronics
- Polar Pattern: Figure-8
- Generating Element: 2.5-micron aluminum ribbon
- Magnets: Rare Earth Neodymium (Grade 52)
- Frequency Response: 30 – 15,000Hz +/- 3dB
- Sensitivity: -36dB (re. 1V/pa)
- Switchable Pad: -15dB
- Switchable Bass Cut: 100Hz (6dB per octave)
- Self-Noise: < 16dB
- Output Impedance: 200 ohms, balanced
- Output Connector: Male XLR 3-pin (Pin-2 hot)
- Rated Load Impedance: 1k-Ohms, minimum
- Maximum SPL: > 160dB @ 1kHz, > 135dB @ 30Hz
- Power Requirements: 48-Volt Phantom Power
- Supply Current: 4mA
- Dimensions: Length including mounting base: 8 1/4” (209.5mm) x 1 3/8” (35mm)
- Weight: 462 grams (16.3oz)
Royer R-12 Active Ribbon Microphone Package Includes
- Royer R-12 Active Ribbon Microphone
- Microphone Holder
- Mic Sock
- Carrying Case
- Royer RSM-SS24 "Sling-Shock" Shock Mount
- Manufacturer Warranty
No review yet, Be first to Write a Review
Write a Review
Sign Up for exclusive sales and offers!