null

Avantone CK-40 Stereo FET Microphone (Used)

(No reviews yet) Write a Review
Product Code: 9999-00058-2
Avantone CK-40
$599.00
$499.00
On Sale!
UPC:
852437001118
In Stock

Avantone CK-40 Stereo FET Microphone

Front End Audio acquires previously owned gear through our Buy-Back program. You can purchase used gear at a great price but there are no manufacturer warranties with these items. These items have been inspected and/or tested by our staff to make sure each one is in working condition and comes with our commitment to service. This CK-40 looks and functions perfectly! Great deal for a great microphone!

The Avantone CK-40 Stereo FET Microphone is a multi-pattern FET Mic, designed to deliver the professional performance. The discreet Class A low-noise FET circuitry of CK-40 yields pleasing professional results comparable to much more expensive stereo microphones. The Avantone CK-40 Stereo FET Mic is truly a gorgeous looking and sounding microphone. The design, character and performance can be compared directly to some of the world's very finest stereo FET mics; but at a fraction of their cost. The rugged Avantone CK-40 Stereo FET Mic body and capsule assemblies are precision machined of brass. Aesthetically, the Avantone CK-40 Stereo FET Mic features an elegant Metallic Cabernet Wine-Red finish, accented with polished nickel trim and plated steel grills. The discreet class A low-noise FET circuitry will yield pleasing professional results comparable to much more expensive designs. Any studio can proudly offer the Avantone CK-40 Stereo FET Mic as a group vocal mic, room mic, piano mic, or utility condenser due to its versatility. It exudes class visually as well as sonically.

The versatile Avantone CK-40 Stereo Class A FET Microphone features twin large 35mm center-terminated pressure gradient transducers. Their close physical proximity places them in a tight vertical array to allow accurate stereo imaging without phase issues arising. The top capsule/grill assembly rotates up to 180 degrees relative to the lower capsule/grill assembly. This feature along with the multi-pattern independent selector choices allow for all stereo recording techniques to be utilized. (XY-Coincident/Blumlein, M-S). The 2 sets of pad, pattern select & LF rolloff switches independently control the capsules. Front switches control the lower fixed grill/capsule while the rear switches control the upper rotating headgrill.

The Avantone CK-40 Stereo FET Mic operates on standard 48 volt phantom power and includes a 5-pin mic cable that plugs into the included 1x2 stereo splitter box. Two standard XLR mic cables are then all that is required to connect to a phantom powered mic preamp/console channel. The included Custom Retro Shockmount is superb in allowing a precise positioning of the Avantone CK-40 Stereo FET Mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results.

So many sonic and spatial options are available with this Avantone CK-40 Stereo FET Mic and the Avantone Pro encourage you to experiment and use your ears as the final judge for stereo panning spread, use of omni vs cardioid or whether utilizing M-S miking techniques will better serve your particular situation etc...

Avantone CK-40 Stereo FET Microphone Features

  • Class A Transformerless FET Electronics
  • 2 Sets of -10 pads/roll-off switches
  • 2 Sets of 3 position pattern select switches (Cardioid-Omni-Figure 8)
  • Custom Retro Shock-mount
  • Wood mic box & aluminum carry case
  • Great for room mic, orchestra, choral, ensemble, instrumental, backing groups vocals, drum overhead, etc.
  • Compare to the Studio Projects LD-2 Stereo Mic

Avantone CK-40 Stereo FET Microphone Specifications

  • Type: Stereo True Condenser Microphone
  • Polar Patterns: Cardioid, Omni, Figure-8 (x2)
  • Capsule(s): (2) Dual plate 35mm gold sputtered diaphragm / brass assembly
  • Frequency Response: 20-20,000 Hz +/- 3dB
  • Output Impedance: <=250 Ohms / transformer isolated
  • Maximum SPL: 147 dB (0.5% THD @1000Hz)
  • Equivalent Noise Level: 17dB (A weighted EC651)
  • S/N Ratio: 77dB re 1Pa
  • Sensitivity: -40dB
  • Output Connector: Male XLR 5 pin with included breakout box and cable
  • High-Pass Switch: 80 Hz 6dB/octave
  • Attenuation Switch: -10dB
  • Power Requirements: Standard 48 Volt Phantom (x2) 3mA current consumption
  • Finish: Polished Nickel trim / Metallic Cabernet Red Body
  • Weight: .95 kgs / 2.1 lbs
  • Dimensions: 27.6cm X 49mm

Avantone CK-40 Stereo FET Microphone Includes

  • Avantone CK-40 Stereo FET Microphone
  • Avantone Custom Retro Shockmount W/ Extra Elastic bands
  • 1 x 2 Splitter Box (Stereo Breakout Box)
  • Elegant Padded Genuine Wooden Mic Box
  • 30' 5-Pin Cable
  • Foam Wind Filter
  • Padded Aluminum Storage / Travel Case

Click here to view all Avantone products

5
Nice Product

this is nice product

No review yet, Be first to Write a Review