Advanced Audio CM47 Tube Microphone

Advanced Audio

(No reviews yet) Write a Review
Product Code: 6463
Adding to cart… The item has been added

This item is currently on back order with the manufacturer but we have more on order. Go ahead and place your order to ensure you get one when they are back in stock. We will keep you updated as we are provided information on the arrival. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Got Questions? Need Support?

888-228-4530 Contact Us!

The Advanced Audio CM47 Tube Microphone is a large dual-diaphragm, multi-pattern, tube condenser microphone inspired by the famous Neumann U-47.

The CM47 is a great choice for vocals, saxophones, acoustic instruments, and excels in front of bass and guitar amps.

The Advanced Audio CM47 features our very accurate and smooth AK67 capsule, a 35mm capsule with 6-micron-thick German mylar diaphragms. Its frequency response falls between those of the U47 and U67 vintage tube microphones.  The AK67 capsule goes down another ½ octave before rolling out, compared to the K47 capsule.  The CM47 also has more “air” or “sizzle” above 10kHz, allowing it to cut more easily through busy mixes without the addition of EQ.

The circuit is designed around the very HiFi 6072 tube and optimized with a two-stage Class "A" CCDA circuit. This circuit provides a much lower output impedance with more headroom than the original circuit used in the original U47. The lower output impedance provides a faster damping factor when driving the BV8 type transformer, delivering a better transient response than the original design. Selected 6072a tubes are some of the quietest tubes made, and are much less susceptible to microphonics than the metal-clad vf14 tubes used in the original U47 tube microphone. The dual-bobbin output transformer with its hum bucking configuration and our optimized circuit will deliver > +14dBu with less than 1% distortion. The output transformer is driven with a 2.2 ufd metal-film capacitor to take advantage of the transformer’s response down below 20Hz.

Advanced Audio CM47 Tube Microphone Features

  • 1.07” (35mm) Ak67 dual back plate, dual 6-micron skinned mylar capsule Capsule polarization 60v on the back-plate.
  • 9 selectable pickup patterns remotely switched from the power supply
  • Dual bobbin BV8 (6.5:1 ratio) output transformer
  • Selected 6072a tube Class A dual stage (CCDA)

Advanced Audio CM47 Tube Microphone Specifications

  • Frequency Response: 20Hz to 20kHz +/–3dB
  • Noise: <15dB (A-weighted)
  • Impedance: < 200 ohm (load impedance <1.2K)
  • Distortion: < 0.5% @128dB
  • Maximum Output: > +14dBu with less than 1% distortion

Advanced Audio CM47 Tube Microphone Includes

  • Advanced Audio CM47 Tube Microphone
  • Power Supply
  • Tube Cable
  • Shockmount
  • Radcase
  • Manufacturer Warranty

No review yet, Be first to Write a Review