The SPL MTC MK2 Monitor & Talkback Controller is the successor to the MTC monitor controller and has been updated with new features adapting it to the demands of modern music production environments.
This classic monitor controller from SPL has been updated with new features adapting it to the demands of modern music production environments! Advanced source and speaker selection, multiple monitoring modes, an integrated premium talkback system, headphone amplifiers with Phonitor Matrix, an additional input for a dedicated artist mix, and an internal audio operating voltage of +/-18 volts make the MTC Mk2 once again the professional studio standard among monitor controllers. The MTC Mk2 provides three pairs of outputs for stereo speakers and a mono output for a subwoofer. The respective stereo pairs are selected with high-quality analog switches. Each pair has its individual switch. Thus, multiple selection is also possible. The SUB switch can be used to switch an additional subwoofer on and off. The SUB can be combined with any speaker pair. The subwoofer output sends a mono summed signal with full frequency range. Alternatively, a mono monitor speaker can be connected to the SUB output. The MTC Mk2 allows three different monitoring modes. As a standard, the mix can be monitored in “stereo”. Mono compatibility can be checked in “mono”. The phase of the signal can be reversed via the phase inversion switch Ø. A special feature is the third mode – the channel swap function: LR SWAP. This reverses the stereo image. Left becomes right and right becomes left. This is especially time-saving when you are monitoring samples in video dubbing that should match a scene with direction of movement. If the direction is not correct, you usually have to load the sample into the DAW to switch channels. LR SWAP allows channel swapping directly in the monitor controller.
SPL MTC MK2 Monitor & Talkback Controller Features
- Monitor Controller
- 4 stereo inputs (3 x balanced, 1 x RCA)
- 3 pairs of outputs for stereo speakers, 1 x mono output for subwoofer
- 2 audiophile headphone amplifiers with individual volume control
- Phonitor Matrix
- Integrated premium talkback system
- Cue mix input for artist monitor mix
- Monitoring modes: phase inversion, mono, M/S and LR Swap
- Meter Out
- Operating voltage +/-18 volts: more headroom!
SPL MTC MK2 Monitor & Talkback Controller Includes
- SPL MTC MK2 Monitor & Talkback Controller
- Power Cable
- Manufacturer Warranty
No review yet, Be first to Write a Review
Write a Review
