Front End Audio has a fantastic deal on this factory direct B-Stock unit, and stock is limited! Radial quality control has deemed this as "B-Stock" so expect a minor cosmetic flaw or blemish. But, rest assured that this will have absolutely no impact on the functionality or performance of this unit. Radial fully inspects and tests every B-Stock product AND they are covered by a full manufacturer warranty. This is your opportunity to grab a great deal on an otherwise "just like new" StageBug SB-6 from Radial!
The Radial StageBug SB-6 Line Isolator is a two-channel passive audio isolator designed to accommodate both balanced and unbalanced signals and effectively eliminate noise when used with instruments, consumer electronics, or professional line-level devices. The SB-6 helps remove noise from two channel audio systems, stereo guitar racks, and pedalboards. Two on-board isolation transformers provide a flat frequency response from 20Hz to 20kHz, while removing hum and buzz from ground loops. Dual ground lift switches help further reduce noise, and a -15dB pad allows you to handle high volume outputs without distortion. When using the SB-6 before a set of powered speakers or guitar amplifiers, a polarity reverse switch corrects frequency cancellation and ensures both speakers play back in phase with one another. The SB-6 is completely passive with no need for power, so it's easy to insert into any system to remove noise quickly. These features combine to make the Radial StageBug SB-6 Isolator a wonderful solution to help rid system noise in two channel audio systems, stereo guitar racks and pedalboards.
Radial StageBug SB-6 Line Isolator Features
- Isolator for balanced and unbalanced signals
- Eliminates hum and buzz caused by ground loops
- Exceptionally linear from 20Hz to 20kHz
- Automatically configures for hi-Z or lo-Z signal chains
Radial StageBug SB-6 Line Isolator Applications
- Using the SB-6 in a stereo setup - Isolate the output from a DJ Mixer to a power amp using the SB-6 to eliminate hum and buzz caused by ground loops. Either ¼" mono or TRS connectors may be used.
- Using the SB-6 in a pro setup - When running multiple speakers, you can often encounter noise due to imperfect power systems and DC offsets. Use the SB-6 to isolate distant loudspeakers to solve the problem.
- Using the SB-6 in a guitar rig - Eliminate noise in your guitar setup by isolating the guitar amp from other electronic devices. This SB-6 works great between your pedalboard or with your wireless system.
Radial StageBug SB-6 Line Isolator Specifications
- Technical Specs:
- Audio Circuit Type: Passive Transformers
- Frequency Response: 20Hz-20KHz +/-1db
- Dynamic Range: >140db
- Maximum Input: >+25dBu
- Gain: -2dB
- Total Harmonic Distortion: <0.0008% @ 1kHz
- Phase Deviation: >5° @ 30Hz
- Input Impedance: Varies with Load/47K
- Output impedance: 600?
- Features:
- Transformer: Eclipse Custom
- Input Pad: -15dB
- Polarity: 180deg reverse
- Ground Lift: Disconnects TRS sleeve at output
- Input Connector: 1/4" TRS phone
- Output Connectors: 1/4" TRS phone
- General:
- Construction: 14 gauge steel chassis & outer shell
- Finish: Durable powder coat
- Size (L x W x D): 3.92" x 2.54" x 1.7" (100mm x 65mm x 43mm)
- Weight: 0.9 lbs (408 grams)
Radial StageBug SB-6 Line Isolator Includes
- Radial StageBug SB-6 Isolator
- User Guide
- Manufacturer Warranty
No review yet, Be first to Write a Review
Write a Review
Sign Up for exclusive sales and offers!