The PreSonus Temblor T10 Active Subwoofer is a solid foundation for mixing. Featuring a 10-inch glass-composite driver, high-temperature voice coil, damped rubber surround in a ported cabinet, and a variable lowpass filter, the Temblor T10 can be dialed in to pair perfectly with full-range studio monitors, making it the ideal solution for any 2.1 system.
The Presonus Temblor T10 Active Subwoofer is a powerful and musical, active, front-firing subwoofer designed to deliver fast and accurate transient response, extending low frequencies without a hint of “tubbiness” or overshoot. It complements full-range monitors without overshadowing them, naturally extending the reach of your full-range system’s low end so that you can produce your best mix from top to bottom.
Tight, Clean, Responsive Bass
The PreSonus Temblor T10’s glass-composite low-frequency driver delivers tight and responsive bass, thanks to its lightweight and rigid cone. This design also provides lower distortion than other materials, ensuring that the sub-bass reproduction in your monitoring system is as coherent and clear as your full-range monitors.
A Perfect Fit with Your Fll-Range Monitors
Temblor-series subwoofers make integrating a subwoofer into your monitoring setup easy so you can create the flattest possible response. The PreSonus Temblor T10 provides a continuously variable lowpass filter (50 Hz to 130 Hz), allowing you to create a seamless crossover transition between your full-range studio monitors and subwoofer for the most accurate listening environment possible.
The Central Hub of Your Monitoring Setup
The PreSonus Temblor T10 subwoofers provide the connections and controls necessary to act as the central hub for a basic monitoring setup. A switchable highpass filter on the full-range outputs helps to avoid frequency cancellation and reinforcement in the subwoofer’s upper range. A polarity invert ensures your system is in phase. The PreSonus Temblor T10 also features a momentary footswitch (included), making it easy to compare your mix with or without sub-bass frequencies and ensure it will sound good on a wide variety of systems.
Accuracy Defined
When you hear the low-frequency foundation of your mix accurately, you can make more informed decisions and create more translatable mixes. The PreSonus Temblor T10 subwoofers are the natural sub-bass extension for virtually any full-range monitoring system.
PreSonus Temblor T10 Active Subwoofer Features
- Main Components
- 10-inch, front-firing, glass-composite low-frequency transducer
- Front-firing, bass-reflex acoustic port
- Controls and Filters
- Input gain control (-30 dB to +6 dB, continuously variable)
- Continuously variable lowpass filter (50 Hz to 130 Hz)
- Built-in crossover
- Switchable highpass filter removes frequency content below 80 Hz from the full-range signal sent from the Temblor outputs to the main monitors
- Momentary footswitch (included) bypasses the subwoofer, highpass filter, and Sub Out
- Polarity invert
- Ground-lift switch
- Power and Safety
- 250 watt, Class AB amplification
- Internal damping and heat sink
- Integrated rubber feet for stable placement
- Inputs and Outputs
- Left and right, balanced XLR and ¼” TRS and unbalanced RCA main inputs
- Left and right balanced XLR and ¼” TRS outputs
- XLR subwoofer output for connecting a second Temblor® T10
PreSonus Temblor T10 Active Subwoofer Specifications
- Inputs
- 2- Balanced XLR
- 2- Balanced ¼” TRS
- 2- Unbalanced RCA
- Outputs
- 2- Balanced XLR (full range with 80 Hz HPF option)
- 2- Balanced ¼” TRS (full range with 80 Hz HPF option)
- 1- Balanced XLR (Sub Out)
- Performance
- Frequency Response: 20 Hz – 200 Hz
- Low Pass Filter Frequency: 50 – 130 Hz (variable)
- Signal-to-Noise Ratio: >98 dB (A weighted)
- THD: 0.019% @ power <160W
- Amplifier Power: 250W peak, 170W RMS
- Power Consumption: 230W
- Amplifier Type: Class AB
- Peak SPL at 1m: 113 dB
- Woofer: 10” glass-composite, front-firing
- Acoustic Port: Front-firing bass reflex
- User Controls
- Input Gain Range: -30 to +6 dB
- Polarity Switch: 0° or 180°
- Low Pass Filter Control: 50 Hz to 130 Hz
- Ground Lift Switch: On/Off
- High Pass Filter Switch: On/Off
- Bypass Footswitch: On/Off
- Protection
- RF interference
- Output-current limiting
- Over-temperature
- Turn-on/off transient
- Subsonic filter
- External mains fuse
- Power
- 100-120V ~50/60 Hz or 220-240V ~50/60 Hz
- Cabinet
- Vinyl-laminated MDF
- Physical
- Width: 12.6” (320 mm)
- Depth: 15.75” (400 mm)
- Height: 15.75” (400 mm)
- Weight: 39.46 lbs (17.9 kg)
PreSonus Temblor T10 Active Subwoofer Includes
- 1 x PreSonus Temblor T10 Active Subwoofer
- 1 x Standard IEC Power Cable
- 1 x Footswitch with Cable
- 1 Year Warranty
No review yet, Be first to Write a Review
Write a Review
