The JK Audio THAT-1 Telephone Handset Audio Tap is designed to connect between your telephone and handset for quick access to audio in and out of the telephone.
The JK Audio THAT-1 Telephone Handset Audio Tap is used by radio stations to record and play sound bytes, and by computer and telephone companies to demonstrate their computer voice services using a powered speaker.
Record and Play Audio Clips
Simply unplug the handset coily cord from the base of your telephone and plug it directly into the JK Audio THAT-1. Then, using the supplied cable, connect the JK Audio THAT-1 back to the telephone. Now connect your audio equipment or powered speaker using the RCA jacks. The grey pushbutton selects which audio will be sent into the telephone (Out = talking on the handset, In = sending audio in through the RCA jack). The output RCA jack contains a nice mix of the audio from both sides of the conversation, as well as the tones being pressed on the keypad. The volume control adjusts the volume of the signal going to your powered speaker or tape recorder.
The JK Audio THAT-1 will work with many different types of analog and digital PBX and ISDN telephones. The receive side of the JK Audio THAT-1 (audio From Phone), will work on any telephone. To send audio into the telephone (To Phone), the telephone must have an electret type microphone in the handset. If your telephone has a round mouthpiece, or if you intend to use this product on many different telephones, you should consider their model THAT-2 which is compatible with a variety of telephone systems. The JK Audio THAT-1 does not work with cordless or cell phones, or any telephone with a keypad in the handset.
JK Audio THAT-1 Telephone Handset Audio Tap Features
- Works with Analog, Digital, PBX, or VoIP Telephones
- RCA Input & Output
- Output Level Control
- Passive Design. No Battery or AC Required
- Made in America
JK Audio THAT-1 Telephone Handset Audio Tap Specifications
- Line Input:
- Type: RCA
- Impedance: 20k Ohms
- Level: 250 mV RMS (+12 dBu Nom)
- Line Output:
- Type: RCA
- Impedance: 2800 Ohms
- Level: 100 mV RMS (-16 dBu Nom)
- Handset Type: Electret
- Handset and Telephone Connectors: RJ22
- Size: 3.7" x 1.6" x 1.3" (9.4 x 4.1 x 3.3 cm)
- Weight: 6.1 oz
JK Audio THAT-1 Telephone Handset Audio Tap Includes
- JK Audio THAT-1 Telephone Handset Audio Tap
- 1/8" (3.5mm) to RCA Cable
- User Guide
- 2 Year Warranty
JK Audio THAT-1 Telephone Handset Audio Tap Downloads
- JK Audio THAT-1 Telephone Handset Audio Tap User Guide (PDF)
- JK Audio THAT-1 Telephone Handset Audio Tap Data Sheet (PDF)
No review yet, Be first to Write a Review