The DPA ST4006C Stereo Microphone Kit contains two compact 4006C Omnidirectional Mics, two mic holders, two windscreens, three grids, and a foam-lined Peli carrying case. The included mics are matched within ±0.5 dB on both frequency response and sensitivity to produce accurate sonic reproduction.
The DPA ST4006C Stereo Microphone Kit's included microphones offer total transparency in any recording situation. This stereo pair picks up incredible detail and depth of sound. The definition of its high-frequency characteristics across a wide range of instruments is impressive. It offers natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 to 20 kHz (±2 dB). The DPA ST4006C Stereo Microphone Kit uses the MMC4006 Omnidirectional Microphone Capsules to gain their amazing sound. Whenever a small, lightweight, inconspicuous microphone for top-quality recording is required, a 4006C Omnidirectional Microphone is the right choice. They come as a hand-matched pair that offers the truest capture of stereo sound available.
DPA ST4006C Stereo Microphone Kit Features
- Carefully matched microphones
- compact size and natural sound
- Full-bodied sound from small-bodied mics
- Heavy-duty Peli™ Case transportation and protection
DPA ST4006C Stereo Microphone Kit Specifications
- Directional Pattern: Omnidirectional
- Principle of Operation: Pressure
- Cartridge Type: Pre-polarized Condenser
- Frequency Response: 10 Hz - 20 kHz
- Effective Frequency Range ±2 dB: 20 Hz - 20 kHz
- Sensitivity, Nominal, ±2 dB at 250 Hz: 40 mV/Pa; -28 dB re. 1 V/Pa
- Equivalent Noise Level, A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
- Equivalent Noise Level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
- Distortion, THD < 1%: 131 dB SPL RMS, 134 dB SPL Peak
- Dynamic Range: Typ. 119 dB
- Max. SPL, THD 10%: 139 dB SPL Peak
- Rated Output Impedance: 100 O
- Minimum Load Impedance: 2 kO
- Cable Drive Capability: 100 m (328 ft)
- Output Balance Principle: Impedance Balancing with Active Drive
- Common Mode Rejection Ratio (CMRR): > 50 dB
- Power Supply (for Full Performance): P48 (Phantom Power)
- Current Consumption: 2.8 mA
- Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
- Color: Matte Black
- Weight: 63 g (2.2 oz)
- Microphone Diameter: 16 - 19 mm (0.6 - 0.75 in)
- Capsule Diameter: 16 mm (0.6 in)
- Microphone Length: 64 mm (2.5 in)
- Maximum Output Voltage, RMS: 4.5 V
- Polarity: +V at Pin 2 for Positive Sound Pressure
- Temperature Range: -40°C to 45°C (-40°F to 113°F)
- Relative Humidity (RH): Up to 90%
- Matching Tolerance (Frequency Response and Sensitivity): ±0.5 dB
- Phase Deviation for Kit: < 5°
DPA ST4006C Stereo Microphone Kit Includes
- 2 x DPA 4006C Omnidirectional Microphones (Matched Pair)
- 2 x Microphone Clips
- 2 x Microphone Windscreens
- 3 x Grids
- 1 x Peli Case
- 5 Year Warranty
Sign Up for exclusive sales and offers!