CAD Stage7 Drum Microphone Pack

(No reviews yet) Write a Review
Product Code: 9857
CAD Stage7
$329.00
(You save $100.00)
$229.00
UPC:
631922105643
Availability: Usually Ships in 24 Hours

CAD Stage7 Drum Microphone Pack

The CAD Stage7 Drum Microphone Pack includes everything you need to mic a drumkit! With three D29 dynamic tom mics, two C9 cardioid condenser mics, one D19 dynamic snare mic, one D10 dynamic kick drum mic and accessories, the Stage7 is a great way to improve your recordings and flexibility at a great low cost.

The CAD Stage7 Drum Microphone Pack is a 7-piece drum kit that combines three D29 dynamic tom mics, two C9 cardioid condenser mics, one D19 dynamic snare mic and one D10 dynamic kick drum mic all in a protective carrying case to meet your drumkit micing needs. Perfect for kick drum, floor toms, guitar cabinets and bass cabinets, the CAD Stage7 incorporates dynamic cardioid capsules with modern electronics.

CAD D29 Cardioid Dynamic Percussion Microphone

The CAD D29 is a cardioid, moving-coil dynamic microphone specifically designed for the capture and reinforcement of tom-tom drums and other acoustic percussive instruments. The cardioid polar pattern provides off-axis rejection crucial for on-stage clarity. Although designed with percussion in mind, excellent results are also obtained when used on on most electrical and acoustical instruments.

The integrated drum clip is designed to facilitate rapid, optimal placement.

CAD C9 Cardioid Condenser Instrument Microphone

The CAD C9 cardioid condenser microphone is designed primarily for overhead drum miking. The cardioid polar pattern focuses sensitivity to the front of the microphone while minimizing sources arriving from the rear. Transformerless line-driver circuitry improves transient agility while maintaining phase alignment for clear detail. The integral polymer isolation mechanically decouples the capsule from the body minimizing acoustical conduction from the floor through the mic stand. Although designed for drum overheads, the CAD C9 also excels when used on classical stringed instruments, acoustic guitars, and folk instruments. P12 (12V), P24 (24V), or P48 (48V) phantom power is required.

CAD D19 Supercardioid Dynamic Percussion Microphone

The CAD D19 is a supercardioid, moving-coil dynamic microphone specifically designed for the capture and reinforcement of snare drum and other acoustic percussive instruments. The supercardioid polar pattern provides off-axis rejection crucial for on-stage clarity. Although designed with percussion in mind, excellent results are also obtained when used on on most electrical and acoustical instruments.

The integral drum clip is designed to facilitate rapid, optimal placement.

CAD D10 Cardioid Dynamic Kick Drum Microphone

The CAD D10 is a cardioid, moving-coil dynamic microphone specifically designed and carefully equalized for kick drum capture and reinforcement. Special attention has been given to enhancing “thump”, “crack” and “click” while reducing “boxiness”. Although designed for kick drum, excellent results are also obtained when used on floor toms, electric guitar and electric bass cabinets.

The die-cast metal body and hardened protective steel screen provide rugged durability. Integrated swivel mount is included.

CAD Stage7 Drum Microphone Pack Features

  • CAD D29 Cardioid Dynamic Percussion Microphone:
    • Specifically designed for the capture and reinforcement of tom-tom drums and other acoustic percussive instruments
    • Cardioid polar pattern provides off-axis rejection crucial for on-stage clarity
    • Excellent results when used on on most electrical and acoustical instruments
  • CAD C9 Cardioid Condenser Instrument Microphone:
    • Packaged in a small, rugged, all-metal body
    • Designed primarily for overhead drum miking
    • Cardioid pattern focuses sensitivity to the front of the mic while minimizing sources arriving from the rear
    • Transformerless line-driver circuitry improves transient agility while maintaining phase alignment for clear detail
    • Integral polymer isolation mechanically decouples the capsule from the body
    • Excels when used on classical stringed instruments, acoustic guitars, and folk instruments
  • CAD D19 Supercardioid Dynamic Percussion Microphone:
    • Specifically designed for the capture and reinforcement of snare drum and other acoustic percussive instruments
    • Supercardioid polar pattern provides off-axis rejection crucial for on-stage clarity
    • Excellent results when used on on most electrical and acoustical instruments
  • CAD D10 Cardioid Dynamic Kick Drum Microphone:
    • Specifically designed and carefully equalized for kick drum capture and reinforcement
    • Special attention has been given to enhancing “thump”, “crack” and “click” while reducing “boxiness”
    • Excellent results when used on floor toms, electric guitar and electric bass cabinets
    • Die-cast metal body and hardened protective steel screen provide rugged durability

CAD Stage7 Drum Microphone Pack Specifications

  • CAD D29 Cardioid Dynamic Percussion Microphone:
    • Operating Principle: Moving-coil Dynamic
    • Polar Pattern: Cardioid
    • Frequency Response: 90Hz -13KHz
    • Sensitivity: -53dBV (2.2mV) @ 1 Pa 90
    • Impedance: 560 Ohms
    • Weight: 6.5oz (0.19Kg)
    • RF Immunity: Meets or exceeds EN55103-2, E1-E4
    • RoHS: Compliant
  • CAD C9 Cardioid Condenser Instrument Microphone:
    • Operating Principle: Condenser
    • Polar Pattern: Cardioid
    • Frequency Response: 40Hz -13KHz
    • Sensitivity: (2.2mV) @ 1 Pa
    • Impedance: 150 Ohms
    • Max SPL: 140dB
    • Self Noise: 27dBA
    • Power Requirements: P12, P24, P48, 2.2mA
    • Weight: 1.12oz (32g)
    • RF Immunity: Meets or Exceeds EN55103-2, E1-E4
    • RoHS: Compliant
  • CAD D19 Supercardioid Dynamic Percussion Microphone:
    • Operating Principle: Moving-coil dynamic
    • Polar Pattern: Supercardioid
    • Frequency Response: 90Hz -14KHz, -6dB
    • Sensitivity: -56dBV (1.6mV) @ 1 Pa 9
    • Impedance: 300 Ohms
    • Weight: 6.5oz (0.19Kg)
    • RF Immunity: Meets or exceeds EN55103-2, E1-E4
    • RoHS: Compliant
  • CAD D10 Cardioid Dynamic Kick Drum Microphone:
    • Operating Principle: Moving-coil dynamic
    • Polar Pattern: Cardioid
    • Frequency Response: 50Hz -16KHz
    • Sensitivity: 67dBV (0.45mV) @ 1 Pa 90
    • Impedance: 60 Ohms
    • Weight: 12.75oz (0.36Kg)
    • RF Immunity: Meets or exceeds EN55103-2, E1-E4
    • RoHS: Compliant

CAD Stage7 Drum Microphone Pack Includes

  • 3 x CAD D29 Dynamic Tom Microphones with Integrated Drum Clips
  • 2 x CAD C9 Cardioid Condenser Instrument Microphone with Clips
  • 1 x CAD D19 Dynamic Snare Microphone with Integrated Drum Clip
  • 1 x CAD D10 Dynamic Kick Drum Mic with Clip
  • Protective Carrying Case
  • 5 Years Warranty

CAD Stage7 Drum Microphone Pack Downloads

Click here to view all CAD products

No review yet, Be first to Write a Review