The Audix M1280B Condenser Microphone a miniaturized cardioid condenser mic with a fully integrated preamp and detachable cable and may be used in a wide variety of live, studio and broadcast applications.
The Audix M1280B Condenser Microphone is equipped with a cardioid capsule and is also available with hypercardioid, omnidirectional or shotgun capsules. The Audix M1280B has a very wide frequency response and may be used in a wide variety of live, studio and broadcast applications. The M1280B miniaturized condenser microphone is available with a wide array of clips and accessories allowing the microphone to be used for drums, percussion, musical instruments, overhead stage miking, podiums, conferences and presentations.
Audix M1280B Condenser Microphone Applications
- Overhead mic for choir, group vocal
- Acoustic instruments
- Ambient room miking
- Symphonic area miking
- Speech, Presentation, Podium
- Cymbals, Percussion
- Acoustic guitar
Audix M1280B Condenser Microphone Features
- Lightweight, small profile
- Miniaturized preamp circuitry
- No external power adapter needed
- 12 mm Gold vapor diaphragm
- Immune to RF interference
- Extremely low noise, high SPL handling
- Designed, assembled, manufactured & tested in the USA
Audix M1280B Condenser Microphone Specifications
- Transducer Type: Condenser
- Frequency Response: 40 Hz - 20 kHz
- Polar Pattern: Cardioid, Hypercardioid, Omni, Supercardioid
- Output Impedance: 150 Ohms
- Sensitivity: 10 mV (C/HC), 12 mV (O), 18 mV (S) / Pa @ 1k
- Signal to Noise Ratio: 73 dB
- Equivalent Noise Level: 21 dB (A-Weighted)
- Maximum SPL: =147 dB
- Dynamic Range: 126 dB
- Power Requirements: 18 - 52 V
- Current Consumption (at 48 Volts): 6.1 mA
- Connector: 3-Pin XLRm
- Polarity: Positive Pressure on Diaphragm Produces Positive Voltage on Pin 2 Relative to Pin 3 of Output XLR Connector
- Materials / Finish: Machined Brass / Black Finish
- Weight: 28 g / 1 oz
- Length: 67 mm / 2.6 in
Audix M1280B Condenser Microphone Includes
- 1 x Audix M1280B Condenser Microphone
- 1 x CBLM25 25' Cable
- 1 x MCMICRO Microphone Stand Adapter
- 1 x MCHANGER Hanging Clip
- 1 x WS1218 External Windscreen
- Manufacturer Warranty
1 Review Hide Reviews Show Reviews
Write a Review
