The Waves DigiGrid IOX Expansion Audio Interface is the perfect high-count I/O interface for your studio's performance and recording room. This advanced audio interface features 12 mic/line inputs with studio-quality preamps and 6 line outputs. Need more I/O? Just add another IOX!
The Waves DigiGrid IOX Expansion Audio Interface delivers high-resolution monitoring in the studio and the control room alike, with four headphone outputs allowing independent mixes for each musician. With your Waves GigiGrid IOX and a dedicated SoundGrid DSP server, you can run up to hundreds of SoundGrid-compatible Waves and third-party plugins, all fully integrated within your DAW of choice. Use a single Ethernet cable to plug the Waves DigiGrid IOX into your SoundGrid network, and you will instantly tap into a world of real-time tracking, mixing and monitoring, with incredibly low latency of only 0.8 milliseconds.
Waves DigiGrid IOX Expansion Audio Interface Features
- General Features
- 12 Mic/line inputs with broadcast/studio-quality preamps
- ASIO- and Core Audio-compliant audio I/O
- 6 Line outputs, 4 headphone outputs
- Connects via a single Ethernet cable (Cat 5e/Cat 6)
- Quick-view front panel metering
- High-definition 192 kHz ADC conversion
- Compatible with SuperRack, MultiRack, eMotion LV1, SoundGrid Studio
- Control Panel Features
- Clock settings: source, sample rate, type, status
- Mic preamp controls: input gains, phantom on/off
- Input and output meters
- Save and load presets of unit settings
- Save your settings along with your Waves and SoundGrid host application sessions
Waves DigiGrid IOX Expansion Audio Interface Specifications
- General:
- Size: 1U Rack-Mounted (Standard 19” Rack-Mount Wide, 4U High, 380-mm Deep Excluding Connectors)
- Supported Sample Rates: 44.1, 48, 88.2 and 96 kHz (176.4 and 192 kHz will be Supported in the Future)
- Inputs: 12 Channel Mic/Line Inputs (on XLR/TRS Combo)
- Outputs: 6 Channel Line Outputs
- Word Clock I/O: Yes
- SoundGrid Ports: 2 SoundGrid Ports (RJ45s)
- Reset Switch: Yes
- Headphone Outputs: 4 Headphone Outputs with Analog Level Knobs; Range: Off to +15 dB
- Clock: Word Clock Input, SoundGrid (SoE), Internal
- AC Input: 1 x AC Input
- Multiple Broadcast Level Format Settings (Jumpers on All Analog I/Os): Yes
- Inputs:
- Input Impedance:
- Mic: 2K Ohms
- Line: 8K Ohms
- Gain Range:
- Mic: 0 dB to +52.5 dB in 7.5-dB Steps
- Line: -10 dB to +42.5 dB in 7.5-dB Steps
- Fine Control: Additional 0dB to 7dB in 0.5-dB Steps
- Maximum Input Level:
- Mic: +26 dBu
- Line: +36 dBu
- Mic Equivalent Input Noise: > -126 dB (150 Ohm Source, Gain +59.5 dB)
- Harmonic Distortion: Typically < 0.01% @ Unity Gain, -10dB Input @ 1 kHz
- Frequency Response: +/-0.5 dB (20 Hz to 20 kHz)
- Channel Separation: Better than 90 dB (40 Hz to 15 kHz)
- Input Impedance:
- Outputs:
- Maximum Output Level: +22 dBu
- Residual Output Noise:
- Frequency Response: +/-0.5 dB (20 Hz to 20 kHz)
- Output Impedance: 50 Ohms
- Channel Separation: Better than 90 dB (40 Hz to 15 kHz)
- Harmonic Distortion: Typically < 0.01% @ Unity Gain, -10dB Input @ 1 kHz
- Dimensions:
- Width: 48.26 cm / 19 inches
- Height: 4.36 cm / 1U
- Depth: 35.6 cm / 14.01 inches
- Device Weight: 4.5 kg / 9.92 lbs
Waves DigiGrid IOX Expansion Audio Interface Software Components
- SoundGrid Studio Application – For managing the SoundGrid network on your host computer
- eMotion ST Mixer – Low-latency monitoring for tracking and rehearsing
- StudioRack – For running plugin chains, saving and loading their presets, and offloading their processing to a SoundGrid DSP server
- SoundGrid ASIO/Core Audio – Connects any DAW to the SoundGrid network as a software I/O
Waves DigiGrid IOX Expansion Audio Interface System Requirements
- SoundGrid Studio Runs on Mac and PC
- Compatible Native DAW (Logic, Cubase, Nuendo, Ableton, Pro Tools Native, and Many More)
- IOX / SoundGrid Studio Software Installed on the Host Computer
- Cat 5e or Cat 6 Ethernet Cables
Waves DigiGrid IOX Expansion Audio Interface Includes
- 1 x Waves DigiGrid IOX Expansion Audio Interface
- 1 x Power Cable
- 1 Year Warranty
3 Reviews Hide Reviews Show Reviews
Write a Review
