The sE Electronics sE7 sideFire Microphones are a factory match pair of microphones ideal for acoustic guitars to pianos to drums and beyond, with a rotated capsules to allow for close miking.
The sE Electronics sE7 sideFire Microphone is a variant of the sE7 high-quality back-electret small-diaphragm condenser microphone intended for a wide range of studio and live sound applications.
MATCHED PAIR
Convincing stereo recordings require microphones with high consistency and accurate localization from the pair of microphones. Therefore, at sE every pair is selected from hundreds of individual microphones to provide identical performance. The result is the highest possible correlation over the whole frequency range, and virtually identical sensitivity for stunning three-dimensional recordings.
HIGH-QUALITY CONDENSER CAPSULE
The sE7 sideFire specialized capsule is designed for natural, balanced sound quality, with an ultra-thin diaphragm for excellent transient response. Its cardioid polar pattern also makes it ideal for most studio or stage applications, delivering great sound for almost any source. the sE7 sideFire has a 90° side address capsule for even more versatility and ability to get into small spaces.
THE QUIETEST PENCIL MIC IN ITS CLASS
With a very short signal path and state-of-the-art electronics, the sE7 sideFire is the quietest microphone in its class. The transformerless design ensures pristine sound quality, reproducing instruments with excellent clarity and depth.
SWITCHABLE PRE-ATTENUATION PAD
The switchable -20dB attenuation pad prevents overloading your preamp or mixer and provides extended dynamic range, enabling close-mic techniques for even the loudest sources like brass instruments and snare drums.
SWITCHABLE LOW-CUT FILTER
The integrated 80Hz low-cut filter helps to eliminate low-frequency rumble or footfall noise, or to compensate for excessive bass (proximity effect) with close-mic techniques.
BUILT LIKE A TANK
The sE7 sideFire’s all-metal chassis provides efficient rejection of any electrical interference and noise, and its high-quality finish ensures a great look for years to come, and the gold-plated XLR connector ensures a loss-free, reliable signal for years of demanding use.
sE Electronics sE7 sideFire Microphone Features
- Side address capsule to allow for miking of tight spaces
- Optimized acoustic design, discrete class-A circuitry and a transformerless output
- Clear, natural sound quality at all frequencies
- Switchable -20dB attenuation pad
- High sound pressure level (SPL) handling capability
- Switchable low-cut 80 Hz filter
- Ultra low-noise components
sE Electronics sE7 sideFire Microphone Specifications
- Capsule: 1 / 2" Back-electret condenser capsule
- Polar patterns: Cardioid
- Frequency range: 20 Hz - 20 kHz
- Sensitivity: 19 mV / Pa (-34.5 dBV)
- Max SPL: 136 / 156 dB (0 / 20 dB attenuation pad)
- Equivalent noise level: 16 dB
- Dynamic range: 120 / 140 dB (0 / 20 dB attenuation pad)
- Signal to noise ratio: 78 dB
- Low-cut filter: 80 Hz, 6 dB / Oct, switchable
- Attenuation pad: 20 dB, switchable
- Current consumption: 3.0 mAElectrical impedance: <200 Ohms
- Recommended load impedance: >1k Ohms
- Connectivity: 3-pin male XLR connector
- Powering: 48V Phantom Power (P48 according to IEC 61938)
- Mic Diameter: 23 mm (0.91 in.)
- Mic length: 130 mm (5.12 in.)
- Mic weight: 163 g (5.75 oz.)
sE Electronics sE7 sideFire Microphones Includes
- sE Electronics sE7 sideFire Microphones (Matched Pair)
- 2x Microphone Clip
- 2x Thread Adapter
- 2x Wind Screen
- Manufacturer Warranty
No review yet, Be first to Write a Review
Write a Review
Sign Up for exclusive sales and offers!