RME Fireface 802 Audio Interface

(1 review) Write a Review
Product Code: 9999-15546
RME Fireface 802
FREE Arc USB
Purchase a RME Fireface 802 and receive a FREE Advanced Remote Control - A $179.00 Value! No wait, it will be included with your order. Want to see more Holiday Specials, then
$1,999.00
UPC:
4260123363055
Availability: Usually Ships in 24 Hours

RME Fireface 802 Audio Interface

The RME Fireface 802 Audio Interface is a highly integrated pro audio solution, a full-blown studio, all within a 19 inch enclosure. An interface designed for users who don't want to make compromises in sound, stability and ultra-low latency operation, and who long for an unrivaled professional feature set.

The RME Fireface 802 Audio Interface renews RME’s reputation built on the legendary Fireface 800. 60 channels of audio, high-end microphone preamps, reference class converters, a complete effects section and operation at up to 192 kHz are the base for many more features:

Ultra-low latency operation with USB or FireWire, combined with the legendary RME driver stability and maintenance. Active jitter suppression, individually switchable reference levels for all inputs and outputs, full stand-alone functionality, RME’s unique DIGICheck metering and analysis toolbox, and identical operation on Windows PC and Mac.

TotalMix FX, RME’s digital high-end mixer and signal router, driven by two powerful DSPs, with integrated EQ, Dynamics and Reverb/Echo effects at up to 192 kHz, plus a built-in monitoring controller.

The full-blown feature set also includes optional Class Compliant mode and operation with TotalMix FX for iPad, RME’s app to fully control the RME 802 Audio Interface from the iPad, without any computer. The easy to use app includes metering for all 90 channels plus effects bus, different setup screens, and complete control of all features.

The RME Fireface 802 Audio Interface is a highly integrated pro audio solution, a full-blown studio, all within a 19” enclosure. An interface designed for users who don’t want to make compromises in sound, stability and ultra-low latency operation, and who long for an unrivaled professional feature set. Once again a milestone interface from RME, including the best of the best and even a bit more.

RME Fireface 802 Audio Interface Connectivity

  • 30 Input / 30 Output Channels
  • 12 x Analog I/O
  • 4 x Mic/Instrument Preamp
  • 1 x AES/EBU I/O
  • 2 x ADAT I/O (or 1 x ADAT I/O plus 1 x SPDIF I/O optical)
  • 1 x Word Clock I/O
  • 1 x MIDI I/O
  • FireWire or USB Operation
  • TotalMix FX
  • Advanced Remote Control (optional)

RME Fireface 802 Audio Interface Features

  • All settings can be changed in real-time
  • Buffer sizes/latencies from 48 up to 8192 samples selectable
  • 8 Channels 96 kHz/24 bit Record/Playback via ADAT optical (S/MUX)
  • Clock modes slave and master
  • Automatic and intelligent master/slave clock control
  • Unsurpassed Bitclock PLL (audi synchronization) in ADAT mode
  • SteadyClock: Jitter-immune, super-stable digital clock
  • DDS technology for free setting of the sample rate
  • SyncAlign guarantees sample aligned and never swapping channels
  • SyncCheck tests and reports the synchronization status of input signals
  • TotalMix for latency-free submixes and perfect ASIO Direct Monitoring
  • TotalMix: 1800 channel mixer with 46 bit internal resolution
  • TotalMix FX: 3-band EQ, Low Cut, Reverb, Echo, Compressor, Expander, Auto Level
  • MIDI I/O with 16 channels high-speed Low-Jitter MIDI
  • 2 x Hi-power headphone output
  • DIGICheck DSP: Level meter in hardware, peak- and RMS calculation

RME Fireface 802 Audio Interface Specifications

  • AD, Line In 1-8, Rear:
    • Resolution AD: 24 bit
    • Signal to Noise Ratio (SNR): 113 dB RMS unweighted, 116 dBA
    • Frequency Response @ 44.1 kHz, -0.1 dB: 5 Hz - 20.8 kHz
    • Frequency Response @ 96 kHz, -0.5 dB: 5 Hz - 45.8 kHz
    • Frequency Response @ 192 kHz, -1 dB: 5 Hz - 92 kHz
    • THD: < -110 dB, < 0.00032 %
    • THD+N: < -104 dB, < 0.00063 %
    • Channel Separation: > 110 dB
    • Input: 6.3 mm TRS jack, electronically balanced
    • Input Sensitivity: 8 kOhm unbalanced, 12 kOhm balanced
    • Input Sensitivity: Switchable to Lo Gain, +4 dBu, -10 dBV
    • Input Level for 0 dBFS @ Lo Gain: +19 dBu
    • Input Level for 0 dBFS @ +4 dBu: +13 dBu
  • Microphone In 9-12, Front, As AD, but:
    • Input: XLR, electronically balanced
    • Input Impedance: 3.4 kOhm
    • Signal to Noise Ratio (SNR): 112 dB RMS unweighted, 116 dBA
    • Gain Range: 54 dB
    • Maximum Input Level, Gain +6 dB: +10 dBu
  • Instrument In 9-12, Front, As AD, but:
    • Input: 6.3 mm TS jack, unbalanced
    • Input Impedance: 800 kOhm
    • Signal to Noise Ratio (SNR): 112 dB RMS unweighted, 115 dBA
    • Maximum Input Level, Gain +6 dB: +21 dBu
  • DA, Line Out 1-8, Rear:
    • Dynamic Range (DR): 115 dB RMS unweighted, 118 dBA
    • Frequency Response @ 44.1 kHz, -0.5 dB: 5 Hz - 20.8 kHz
    • Frequency Response @ 96 kHz, -0.5 dB: 5 Hz - 45 kHz
    • Frequency Response @ 192 kHz, -1 dB: 5 Hz - 89 kHz
    • THD: -104 dB, < 0.00032 %
    • THD+N: -100 dB, < 0.00063 %
    • Channel Separation: > 110 dB
    • Output: 6.3 mm TRS jack, servo-balanced
    • Output Impedance: 75 Ohm
    • Output Level Switchable Hi Gain: +4 dBu, -10 dBV
    • Output Level at 0 dBFS @ Hi Gain: +19 dBu
    • Output Level at 0 dBFS @ +4 dBu: +13 dBu
    • Output Level at 0 dBFS @ -10 dBV: +2 dBV
  • DA - Stereo Monitor Output Phones (9-12) As DA, but:
    • Output: 6.3 mm TRS stereo jack, unbalanced
    • Maximum Output Level at 0 dBFS, High: +16.8 dBu
    • Maximum Output Level at 0 dBFS, Low: +2 dBV
    • Output Impedance: 30 Ohm
    • AES/EBU: 2 x XLR, transformer-balanced, galvanically isolated, according to AES3-1992
  • ADAT Optical:
    • Type: 2 x TOSLINK I/O, format according to Alesis specification
    • Standard: 2 x 8 channels 24 bit, up to 48 kHz
    • Double Speed (S/MUX): 2 x 4 channels 24 bit 96 kHz
    • Quad Speed (S/MUX4): 2 x 2 channels 24 bit 192 kHz
    • Quad Speed Windows USB: 1 x 2 channels 24 bit 192 kHz
  • SPDIF Optical (via ADAT2): 1 x optical, according to IEC 60958
  • Word Clock: BNC, switchable termination
  • System Requirements:
    • Windows: XP SP2 or up,
    • Intel Mac: OS X (10.6 or up)
    • OHCI: 1 x OHCI compatible FireWire Port 400 (1394a), FireWire 800 (1394b) via cable adapter
    • USB: 1 x USB 2.0 port or USB 3.0 port
    • For USB: Computer with at least Pentium Core 2 Duo CPU

RME Fireface 802 Audio Interface Includes

  • Fireface 802 Audio Interface
  • Cable USB 2.0, 1.8 m (6 ft)
  • RME Driver CD
  • Power Cord
  • Optical Cable (TOSLINK), 2 m (6.6 ft)
  • User Manual
  • 6 Months Warranty

RME Fireface 802 Audio Interface Downloads

Click here to view all RME products

1 Review Hide Reviews Show Reviews

  • 5
    RME Fireface 802 - fantastic

    Posted by Steven Gordon on Aug 7th 2014

    I replaced my Apogee Ensemble with the RME. Fantastic sound, easy setup. I have to learn Totalmix, but I can see that it's a great piece of software on its own. Again, Ryan at Frontendaudio steered me in exactly the right direction.