Front End Audio has a fantastic deal on this factory direct B-Stock unit, and stock is limited! Radial quality control has deemed this as "B-Stock" so expect a minor cosmetic flaw or blemish. But, rest assured that this will have absolutely no impact on the functionality or performance of this unit. Radial fully inspects and tests every B-Stock product AND they are covered by a full manufacturer warranty. This is your opportunity to grab a great deal on an otherwise "just like new" ProRMP from Radial!
The Radial ProRMP Passive Re-Amping Box is a simple, effective solution for sending recorded tracks back out to guitar and bass amplifiers with authentic feel and tone. The Radial ProRMP Passive Re-Amping Box is a 100% passive reamper that lets you to take a pre-recorded track and re-amplify it through a guitar amp or effects pedals to create new and exciting tones. Designed for project studios, professional facilities, and mobile rigs, the ProRMP makes re-amping accessible and reliable, delivering natural amp interaction without noise, distortion, or guesswork. The Radial ProRMP is a passive re-amping device that converts balanced line-level signals from an audio interface or mixer into the correct impedance and level for instrument amplifiers. At the heart of the ProRMP is a custom Radial transformer that provides isolation and proper signal matching, allowing amps to respond as if a guitar or bass were plugged in directly. A front-panel level control lets you dial in the perfect send level, while a ground lift switch helps eliminate hum and buzz caused by ground loops. Housed in Radial’s rugged 14-gauge steel enclosure and requiring no power, the ProRMP is a dependable tool for re-amping guitars, basses, and creative sound design elements in both studio and live production environments. The Radial ProRMP - affordable Reamping for every studio!
Radial ProRMP Passive Re-Amping Box Features
- Play pre-recorded tracks through amps and pedals
- On board level control for fine tuning amp level
- Transformer isolated to eliminate buzz and hum
- Opens the door to creative new tones and textures
- Plug and play easy to use
- Eliminates tiresome repetition
- Hire top players and change their tone later!
- Monitor the new sound in the control room
- Lets you capture the sweet spot in your room
- Reamping guitars for new sounds
- Reamping voice for fun effects
- Reamping keyboards through guitar amps
- Reamping drums & percussion
Radial ProRMP Passive Re-Amping Box Applications
- Reamping Step-1 - Record the guitar track using a Radial direct box like the Pro48. This splits the signal so that the guitar player can hear his amp while you capture the clean (dry) performance.
- Reamping Step-2 - Send the dry track from your recording system to the Radial ProRMP. This then feeds your guitar amp and pedals. Adjust the tone and move the mics until you get the sound you want.
- Using the ProRMP with a wireless system - Most wireless systems simply do not sound all that good. Take the balanced output from the wireless and send it through the Radial ProRMP. You will be amazed at the warmth!
Radial ProRMP Passive Re-Amping Box Specifications
- Technical Specs:
- Audio Circuit Type: Passive, transformer isolated
- Frequency Response: 20Hz ~ 20KHz (+0/-1dB)
- Dynamic Range: >137dB
- Equivalent Input Noise: >-98dBu Noise plus gain
- Phase Deviation: 0.3° @ 100Hz; 5° @ 20Hz
- Gain: >-10dB
- Maximum Input: >+26dBu
- Total Harmonic Distortion: 0.003%
- Common Mode Rejection Ratio: 100dB @ 60Hz (unbalanced source)
- Input Impedance: 600 Ohms
- Output Impedance: 600?, balanced
- Noise: -111dBu
- Signal to Noise Ratio: 81dB
- Features:
- Input Pad: -15dB
- 180° Polarity Reverse: Inverts signal polarity
- Ground Lift: Disconnects pin-1 at XLR output
- Merge: Input summing mixer
- Speaker Filter: -30dB pad and band-pass filter
- XLR Configuration: AES standard (pin-2 hot)
- General:
- Power: Passive, no power required
- Construction: 14 gauge steel chassis and outer shell
- Finish: Durable powder coat
- Size: 3.3" x 5.0" x 2" (84 x 127 x 48mm)
- Weight: 1.55 lbs (720 g)
- Conditions: For use in dry locations only between 5°C and 40°C
Radial ProRMP Passive Re-Amping Box Includes
- Radial ProRMP Passive Re-Amping Box
- User Guide
- Manufacturer Warranty
No review yet, Be first to Write a Review
Write a Review

Sign Up for exclusive sales and offers!