The Radial BassBone V2 Instrument Preamp is a two channel bass preamp with a number of customizable features to suit any type of setup or playing style, while providing superb audio quality ideal for a live stage or studio recording.
The Bassbone V2 combines high quality audio performance with the ability to take control of your tone and configure each feature to match your ideal setup. Seamlessly switch between upright and electric basses, while tailoring the signal from the upright with a three band EQ, high-pass filter, and a high impedance input for a more natural tone. You can engage your effects pedals with a single footswitch, and assign them to either input individually, or share them across both. A wet/dry control for the effects loop provides the ability to blend the original bass signal in with the output from the pedals, preserving the tone and clarity of your instrument. The Bassbone V2 also features a powerful clean boost that can be activated with a footswitch, or reconfigured as a mute switch for silent tuning on stage.
Radial BassBone V2 Instrument Preamp Features
- Two-channel bass preamp for 1 or 2 basses
- Built-in Radial DI with low-Z balanced out for the PA
- Combination power booster, effects loop and mute
- Powerful EQ and level controls for each bass
- Switch between two basses on stage
- Lets you perform without an amp
- Delivers your tone to the PA system
- Puts you in control of your sound
- Works equally well in studio as it does live
- Mute switch for quiet tuning on stage
- Can make any bass sound dramatically different
- Super compact yet extremely powerful
Radial BassBone V2 Instrument Preamp Applications
- Using the Bassbone V2 with two bases - The Radial Bassbone V2 is designed to let you switch between any two basses. Use channel-1 and your amp's EQ to set you primary tone. Use channel-2's ultra powerful EQ to compensate so that each instrument sounds its best.
- Switching between upright and electric - The Radial Bassbone V2's high performance preamp is well suited for all instruments including upright bass. This lets you toggle between electric and acoustic and optimize the tone going to your stage amp and the PA system. Add effects pedals using the built-in effects loop.
- Using the Bassbone V2 with one bass - The Radial Bassbone V2 is the ultimate front end for any bass. Channel-1 can be set flat or augmented with two modern presets. Channel-2's 3 band EQ is so powerful that it can turn your P-bass into a Rickenbacker!
Radial BassBone V2 Instrument Preamp Specifications
- Audio Circuit Type: Discrete class-A FET input with low noise ICs.
- Frequency Response: 20Hz ~ 18kHz
- Total Harmonic Distortion: 0.05% @ -15dBu
- Intermodulation Distortion: 0.2% @ -20dBu
- Dynamic Range: 85dB
- Input Impedance: Input A: 220K
- Input Impedance: Input B: 220K/10M
- Output Impedance: 300 Ohms at XLR
- Maximum Input: +7 dBu
- Gain: Unity gain device
- Gain-Boost Drive: 0 to 25 dB
- Noise Floor: -100dB
- Equivalent Input Noise: -92dBu at XLR
- HPF-2 High Pass Filter: Flat, 35Hz and 60Hz (6 dB/Octave)
- XLR Configuration: Pin 2 +, Pin 3 -, Pin 1 Ground
- Ground Lift: Lifts pin-1 on the XLR
- Power: +15VDC/400mA adapter included
- Construction: 14 gauge steel
- Finish: Powder-coat
- Size: (L x W x D) 5.5" x 4.2" x 2" (203 x107 x 48mm)
- Weight: 2.55lb (1157 grams)
- Conditions: Use in dry locations only between 5°C and 40°C
Radial BassBone V2 Instrument Preamp Includes
- Radial BassBone V2 Instrument Preamp
- Manufacturer Warranty
No review yet, Be first to Write a Review
Write a Review
Sign Up for exclusive sales and offers!