The Miktek HM2 Headphone Amplifier is a dual channel headphone amplifier that allows you to independently mix the level of your microphone with a stereo source. The HM2 is an ideal unit for personal monitoring, either on stage or in the studio.
The Miktek HM2 Headphone Amplifier's setup is super easy! Just make sure all the knobs are turned all the way down. Connect the supplied DC adapter to the 20V DC POWER INPUT on the rear panel and then plug the adapter into any standard AC outlet.
Connect your microphone to the Miktek HM2 MIC INPUT using a standard balanced XLR microphone cable. Then use a second standard microphone cable to connect the MIC THRU output to the input on your main mixer.
Miktek HM2 Headphone Amplifier Features
- Balanced XLR microphone INPUT
- Balanced XLR microphone THRU to link signal to the main mixer
- 1/4" Stereo INPUT for feeding a stereo monitor signal from the main mixer
- 1/4" Stereo MIX THRU for sending the same stereo signal to multiple units
- MONO switch for summing line level input
- MIC GAIN to set the microphone at a desired level
- MIX GAIN to control the level of stereo input signal
- Headphone outputs on 1/4" & 3.5mm jack connectors
Miktek HM2 Headphone Amplifier Specifications
- Frequency Response: 10Hz to 93kHz
- Noise Level: -100 dBu
- THD+N: <0.04%
- Input Impedance: >10k Ohm
- Output Impedance: 100 Ohm
- Stereo Input: 1/4" Phone Jack, Unbalanced
- Mix Thru: 1/4" Phone Jack, Unbalanced
- Mic In: XLR Connector, Balanced
- Mic Thru: XLR Connector, Balanced
- Max Input Level: +20dBu
- Power Supply: 18V DC
- Dimensions: (W x D x H) 144mm x 102mm x 28mm
- Weight: 0.4Kg
Miktek HM2 Headphone Amplifier Includes
- HM2 Headphone Amplifier
- 20V AC Adapter
- Owners Manual
Sign Up for exclusive sales and offers!