Front End Audio acquires previously owned gear through our Buy-Back program. You can purchase used gear at a great price but there are no manufacturer warranties with these items. These items have been inspected and/or tested by our staff to make sure each one is in working condition and comes with our commitment to service. This ART Pro Channel II looks great and functions perfectly. It has been upgraded with Gold Lions (12ax7, and 12at7) Tubes and the original tubes are also included. This is a great deal for a great upgraded channel strip!
The ART Pro Channel II Tube Channel Strip uses second-generation discrete Class-A microphone preamp to provide clean quiet gain while maintaining incredible transparency. The Pro Channel II is a powerful dynamics processor subtly controls transients and noise of the most demanding sources. The ART Pro Channel II Tube Channel Strip‘s semi-parametric EQ offers wide tune-ability and can be patched before OR after the dynamics processor. Separate rear-mounted insert points allow patching in external signal processing gear immediately after the Mic preamp and before the EQ and dynamics processor. Both analog and LED meters provide a detailed indication of audio levels.
ART Pro Channel II Tube Channel Strip Features
- Fully Featured discrete class "A" Tube Microphone Preamplifier
- 1/4" High Z input on the front panel
- Selectable plate Voltage
- Smooth musical sounding Optical Compressor
- Separate Attack and Release controls
- Auto/Manual Attack/Release switch
- Parametric EQ
- Large VU and LED meters
- Multi section clip monitor LED
- Selectable Source switches for VU signal monitoring of any section of the unit
- Two insert loops
- +4/-10 dB switch for optimal signal output levels
- Toroidal power transformer for low noise
ART Pro Channel II Tube Channel Strip Specifications
- Input Impedance:
- Mic: 150 to 3.4K Ohms, variable
- Instrument: 2.5M Ohms
- Preamp Insert: .5K Ohms
- Output Impedance:
- Balanced Output: 600 Ohms balanced
- Unbalanced Output: 300 Ohms
- Insert Outputs: 300 Ohms
- Frequency Response:
- Analog In to Analog Out: 12Hz to 100KHz +0, -1dB
- THD @ 1 KHz: <0.15% Typical
- THD @ to to 20 KHz: <0.033% Typical
- Equivalent Input Noise:
- Mic/Line: -128dBu, Input Shortened, Max Gain, "A" Weighted
- Instrument: -109 dBu, Input Shortened, Max Gain, "A" Weighted
- Maximum Input Level:
- Mic: +18dBu Balanced
- Instrument: +15 dBu
- Maximum Gain:
- Mic: 70dB (XLR to Balanced Output)
- Instrument: 64 dB (1/4" to Balanced Output
- Maximum Output Level:
- Balanced: +24 dBu
- Unbalanced: +20 dBu
- Output Level At Meter 0 VU: +4 dBu/-10dBV
- Preamp:
- Microphone Gain: 0 dB to +56 dB
- Instrument Gain: +3 dB to +50 dB
- Low Cut Filter: 0 - 250 Hz, 1-pole, 6 dB/Octave
- EQ:
- Boost/Cut: +/- 12 dB on Each Band
- Low Freq. Tuning: 40 / 120 Hz Selectable
- MID 1 Freq. Tuning: 20 Hz to 2 KHz Continuously Variable
- MID 2 Freq. Tuning: 200 Hz to 20 KHz Continuously Variable
- High Freq. Tuning: 6 KHz / 18 KHz Selectable
- Compressor / Limiter:
- Attack Time: 250 uSec. to 100 mSec.
- Release Time: 00 mSec to 3 Sec.
- Compression Ratio: 2:1 to 30:1
- General Specs:
- Dimensions (H x W x D): 3.5" x 19.0" x 9.2" (8.9cm x 48.3cm x 23.3cm)
- Weight (lbs/kg): 11/5
- Power Requirements: USA - 105 to 125 VAC/ 60 Hz. Export Units Configured for the Country of Destination
ART Pro Channel II Tube Channel Strip Includes
- ART Pro Channel II Tube Channel Strip
- IEC Power Cable
- Original Tubes
- Original Box
No review yet, Be first to Write a Review
Write a Review
Sign Up for exclusive sales and offers!