Home > Studio Recording > Analog Gear > Preamps > Single Channel >

Coil Audio CA-286 Preamp

Coil Audio CA-286
Coil Audio CA-286
 
Alternative Views:


List Price: $1,699.00
Our Price: $1,699.00


Availability: Usually Ships in 24 Hours
Product Code: 1475

 

Coil Audio CA-286 Preamp

The Coil Audio CA-286 Preamp is a two-stage amplifier based on circuits used by Langevin, Collins, Gates, and Telefunken during the 1950s and 60s. Each amplifier uses our own custom interchangeable transformers, NOS capacitors and resistors, and a pair of NOS EF86 vacuum tubes.

With the addition of a flexible input pad network, the Negative Feedback tone shaping, and inter-stage volume control, the CA-286 is a timeless and flexible amplifier that compliments any microphone collection. You must have the Coil Audio PS6 Rack to power the Coil Audio CA-70 Preamp.

Coil Audio CA-286 Preamp Conntorls

  • The (INPUT) pad section contains a phase reverse switch, and a 5 position attenuation network of Balanced H-pads. The first four positions are various 150/250 Ohm mic pads; -6 db, -12 db, and -19 db. The final (LN) position allows line-level signals to run through the amplifier providing tone-shaping capabilities while mixing. It works as both a second-stage booster for other preamps, and a summing/buss amp for program and mix material. Two amplifiers can also be chained together to create the multi-stage, high gain recording path of a vintage tube console.
  • The NF, HI, and LOW controls all interact to create a unique tone-shaping circuit. The NF control varies the amount of Negative Feedback present in the circuit. Counter-clockwise brightens and moves the sound forward while raising harmonics and sensitivity. Turning it clockwise increases negative feedback, producing a darker tone with a smooth, dampened harmonic structure.
  • The HI switch transitions from the natural openness of the tubes, to a gentle filtering of upper frequencies. The LOW switch reacts with the NF, boosting or cutting low frequency while moving the low end from front to back in the sound stage.
  • The Output control knob is placed between the 1st and 2nd stage EF86 tubes. It sets the final level and offers further control of the two-stage gain structure.

Coil Audio CA-286 Preamp Transformer Options

Preamp Input Transformer
  • CT-110: A nickel/iron microphone input transformer based on a punchy 1960s small signal coil. It's perfect for all-around use and excels at high transient material. Its design gives it a very forward and rich mid-range, with smooth saturation in the highs and lows.
  • CT-110HN: A super-mu microphone input transformer based on a rare 1950s hi-fidelity coil. Detail oriented, it adds an excellent top and bottom extension, and smooth, breathy saturation.
Line Input Transformer
  • CT-41: A line output (or input) transformer based on a popular 1960s Peerless design. Frequency response is ruler flat from 20Hz to 30kHz, dipping just below 1db at 60kHz. Its smooth saturation imparts a rich, wooly, and hi-fi sound to anything that runs through it.
  • CT-11: A Universal 1:1 line isolation transformer. Based on another 1950s coil design, it imparts a rich, hi-fi sound to any signal. The impressive frequency response of +/- .5db from 20Hz - 60kHz make it an unbeatable performer for isolation or balancing unbalanced signals and devices.

Coil Audio CA-286 Preamp Features

  • Two-stage EF86/6267 pentode vacuum tube-based circuit
  • 42db-60db of available gain
  • Flexible input pad section for mic or line level operation
  • Transformer balanced. 150 Ohm or 10k input, 600 Ohm output
  • Interchangeable/Optional input and output transformers
  • NOS tubes, signal caps & resistors, PEC 2W carbon pots
  • Up to Six CA Series Amplifiers mount into our PS6 Rack
  • Hand Built and Tested in the USA

Click here to view all Coil Audio products


You may also need...
Auralex Tubetak Pro Liquid Adhesive
Our Price: $9.99

Add
Auralex Tubetak Pro