ART SP4x4 Pro Power Distribution System

(No reviews yet) Write a Review
Product Code: 7564
ART SP4x4 Pro
$219.00
(You save $74.00)
$145.00
UPC:
840402017721
Availability: Usually Ships in 24 Hours

ART SP4x4 Pro Power Distribution System

The ART SP4x4 Pro Power Distribution System is designed to protect your delicate electronic equipment with a high voltage varistor (MOV) surge and transient suppressor. The fast-acting suppression circuit responds in less than a nanosecond, clamping transient voltages to safe levels.

The ART SP4x4 Pro Power Distribution System is built on the foundation of the popular 4x4s and is durably constructed, reliable power conditioners for use in many applications. Wherever power management system is required, the ART SP4×4 Pro provides the surge protection you need to keep your rack safe from unwanted disruption.

The ART SP4x4 Pro has an additional internal discrete module called APF™ (Advanced Power Filtering) which filters out digital and dimmer hash as well as any high frequency noise that is above the audio range. Some off-the-shelf add-on modules saturate and lose their filtering effectiveness as the load increases, but by using a high power discrete design the ART was able to create a filter that stays effective over the full operating range.

By using both Common Mode and Differential Mode topologies in series for the filter design the ART is able to block virtually all of the unwanted noise that is between the AC line and ground, and also the two sides of the AC line. This has the additional benefit of reducing ground loop problems in your system. High frequency noise currents in particular are highly attenuated in both directions so that any line noise that could be generated by one of your components is not allowed to get back into your main A.C. wiring so if you use a number of the ART SP4x4 Pro Power Conditioners in your setup, you can distribute and isolate the noisy components from the sensitive components in your system. Additionally, any signals above 10kHz are filtered from the line with over 40dB of attenuation above 100kHz and beyond.

ART SP4x4 Pro Power Distribution System Features

  • APF – Advanced power filtering
  • Pull out light pipes with auto-off and dimmer
  • Easy to read LED input voltage metering
  • Power capacity of 1800 watts
  • Surge and spike protection
  • EMI and RFI filtering
  • 8 Rear outlets with power adapter friendly positioning
  • One front-mounted unswitched power outlet
  • Rear mounted gooseneck light source

ART SP4x4 Pro Power Distribution System Specifications

  • Power Capacity: 1800 Watts
  • Circuit Breaker: 15 Amp
  • Power Outlets: Eight Rear Outlets
  • Power Switch: Front Location - On/Off
  • Power Switch Illumination: Yes - In “On” Position
  • Circuit Breaker: Front Location
  • Filtering: EMI, RFI, Common Mode Passive Differential Mode in Series
  • Protection Circuit: Surge & Spike Protection
  • Construction: All-Steel Chassis
  • Light Pipes: 2 Front Pull-Out, Shock Mounted
  • Metering: Input Voltage

ART SP4x4 Pro Power Distribution System Includes

  • SP4x4 Pro Power Distribution System
  • Owners Manual
  • 1 Year Warranty

ART SP4x4 Pro Power Distribution System Downloads

Click here to view all ART products

No review yet, Be first to Write a Review