ART DTI Isolation Box

(No reviews yet) Write a Review
Product Code: 7595
ART DTI Isolation Box
In Stock, Usually Ships In 24 Hours

ART DTI Isolation Box

The ART DTI Isolation Box is a high quality totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise.

The ART DTI Isolation Box' audio transformers have an extremely flat and wide frequency response and can handle high signal levels while an isolated balanced output. This gives the ART DTI a very clean and neutral sound with a wide variety of maintaining signal sources. The transformers are wound for 1:1 unity gain and are designed to be used with impedances from 600 ohms to 100k ohms.

What further sets the ART DTI apart from other lesser isolation boxes is its connection versatility. The ART has provided XLR, 1/4? phone, and RCA type phono connections on all inputs and outputs. This allows it to easily fit into virtually any audio system and be the clean patch point between all types of systems. Whether you need an interface between a computer based audio workstation and your monitor system, isolation on long cable runs in a fixed installation, isolation of a signal source from your recording equipment, or in many cases, just a safer connection between two audio systems, the ART DTI can accommodate. The compact black anodized all aluminum case and it’s passive design allow the ART DTI to provide years of trouble free service in Live Sound, Permanent/Fixed Install, D.J., and virtually any PA application. It’s full feature set, rugged construction, and high-end specifications make the ART DTI the obvious choice.

ART DTI Isolation Box Features

  • Isolates components in sound systems to eliminate ground issues
  • High quality transformers
  • XLR, ¼-inch and RCA inputs and outputs
  • Rugged anodized aluminum case
  • Passive design

ART DTI Isolation Box Specifications

  • Frequency Response: 10Hz-50kHz +/-.5dB@+4dBu
  • Total Harmonic Distortion: .01% Typical @ 1kHz, +18dBu, <.05% @ 100Hz, +24dBu
  • Insertion Loss: .4dB@100k O load, 5.5dB @ 600 O load
  • Input Connectors: XLR-F Balanced,1/4-inch TRS Balanced / Unbalanced, and RCA Jacks
  • Output Connectors: XLR-M Balanced, 1/4-inch TRS Balanced / Unbalanced and RCA Jacks
  • Power Requirements: Passive
  • Dimensions: 1.75?H x 4.2?W x 3.5?D (44.5mm x 107mm x 89mm)
  • Weight: .75 lbs (0.34kg)

ART DTI Isolation Box Includes

  • ART DTI Isolation Box
  • Owners Manual
  • 3 Year Warranty

ART DTI Isolation Box Downloads

Click here to view all ART products

Front End Audio

No review yet, Be first to Write a Review