Home > Instruments > Bass > Pedals & Effects >

  Tech 21 SansAmp RBI Bass Tube Amp Emulator

Tech 21 RBI
Tech 21 RBI
 
Alternative Views:


List Price: $435.00
Our Price: $329.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-09437

 

Tech 21 SansAmp RBI Bass Tube Amp Emulator

The Tech 21 SansAmp RBI Bass Tube Amp Emulator, with access to the most coveted classic and modern bass tones, and unlimited freedom to create your own, the SansAmp RBI is practically mandatory for any bass player!

Tech 21 SansAmp RBI Bass Tube Amp Emulator Details

The 1U rackmount Tech 21 SansAmp RBI is a pumped-up, expanded version of the popular SansAmp Bass Driver DI pedal. In addition to Drive, Presence, and active Bass and Treble controls, the SansAmp RBI has a dedicated Mid control and an XLR Output Level control for optimum performance with PA systems. It also features an Effect Loop with a Mix 50/50 switch (for parallel or series operation), an XLR output with selectable levels, and a buffered direct XLR output to provide a dry signal. Include access to the most coveted classic and modern bass tones, with unlimited freedom to create your own, and the SansAmp RBI is practically mandatory for any bass player.

Armed with a truckload of bass amp rigs in a single rackspace, you can travel as heavy or light as you like:

  • Show up at any studio with just a SansAmp RBI and plug directly into the board for premium tones without miking.
  • Gig with the SansAmp RBI directly through the house PA without using a separate amp.
  • Go to a gig with a SansAmp RBI, a Bass Power Engine 60 (see optional accessories below) and run directly through the house P.A. system.
  • Take a more "traditional" set-up to a gig with a SansAmp RBI, power amp and speaker cabinet, and run directly through the house P.A. system.

Tech 21 SansAmp RBI Bass Tube Amp Emulator Features

  • Drive adjusts the overall amount of gain and overdrive
  • Presence brings out the upper harmonic content and attack
  • Blend allows you to mix the direct instrument signal with SansAmp Tube Amplifier Emulation circuitry
  • Active Bass and Treble controls cut or boost ±12dB
  • Dedicated Mid control, cut or boost ±12dB
  • Individual Level control for the XLR out to optimize your amp's output relative to the P.A. system
  • Effects Loop
  • Mix 50/50 switch to configure the Effects Loop in series or parallel
  • 1/4" rear input and XLR output with selectable levels
  • Buffered uneffected XLR output to run a dry signal to a separate channel
  • Footswitch input to engage unit
  • Footswitch output to chain and toggle between another SansAmp RBI

Tech 21 SansAmp RBI Bass Tube Amp Emulator Specifications

  • Input Impedance-Input 1: 1Mohm
  • Input Impedance-Input 2: 1Mohm
  • Output Impedance-1/4": 1K Ohm min
  • Output Impedance-XLR: 600 Ohm min
  • Input Level-Input 1: 1V RMS max
  • Input Level-Input 2: 1V RMS or 10V max, with -20dB pad engaged
  • Output Level-XLR: Switchable to -20dB or 0dB range
  • Maximum Output Level: +10dB or better
  • Effects Loop Send: 1K Ohm min, -20dB
  • Effects Loop Return: 100K Ohm min, -20dB
  • Low Frequency Response: 10Hz or better
  • High Frequency Response: Harmonic content, 20kHz or better
  • Maximum Power Consumption: 5 Watts
  • AC Input Power (factory set): 100V, 117V, 230V, 240V
  • Cycles: 50/60 Hz - NOTE: Each unit is constructed for specific voltages. AC power cannot be switched.
  • Enclosure: Aluminum and steel, fully shielded
  • Dimensions: 19.0"w x 1.75"h x 5.25"d / Overall depth: 6.25"
  • Weight: 5 lbs.

Tech 21 SansAmp RBI Bass Tube Amp Emulator Downloads

Click here to view all Tech 21 products