Home > Monitoring > Headphones > Headphone Amps >

  ART HeadAmp 6 Pro 6-Channel Headphone Amplifier

ART HeadAmp6Pro
ART HeadAmp6Pro
 
Alternative Views:


List Price: $249.00
Our Price: $199.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-03131

 

ART HeadAmp 6 Pro 6-Channel Headphone Amplifier

The ART HeadAmp6PRO is a six-channel stereo headphone amplifier that includes a six-channel auxiliary input section that can be used to provide the popular "More-Me" function on each headphone mix.

ART HeadAmp 6 Pro 6-Channel Headphone Amplifier Details

The ART HeadAmp6PRO is a six-channel stereo headphone amplifier that includes a six-channel auxiliary input section that can be used to provide the popular "More-Me" function on each headphone mix. Each output channel also features a dual function BALANCE control which will pan between LEFT & RIGHT sides of the main signal bus, or vary the MIX between the main signal bus and the AUXILIARY input for that respective channel.

Bass and treble controls are included on each output channel for fine-tuning the tone. Outputs include both front and rear panel stereo 1/4-inch TRS jacks for ease of installation and quick patching capability. Two MONO select buttons on each channel select between four operating modes; 1) Stereo, 2) Mono Left, 3) Mono Right, 4) Mono Both (Left & Right) for versatile monitoring solutions.

The main outputs for each channel of the headphone amplifier are rear mounted stereo TRS jacks and are wired in parallel with the corresponding output jacks on the front panel. Front panel, rear panel, or both front and rear panel outputs can be used simultaneously to drive headphones or be used as feeds to additional headphone amplifiers in a distributed audio network.

Input options include XLR and 1/4-inch TRS balanced inputs with matching "Thru" jacks for bridging multiple HeadAmp 6 Pro units. An additional front panel stereo 1/4-inch TRS jack for quick patch override of the rear panel inputs is included for quick insertion of any stereo source. Eight-segment LED level indicators provide visual feedback of the signal level on all channels as well as the main signal bus.

ART HeadAmp 6 Pro 6-Channel Headphone Amplifier Features

  • Six independent high-power amplifier channels
  • Bass and treble EQ per channel
  • Dual function pan/mix control per channel
  • Stereo aux input for each channel
  • Multiple monitoring settings per channel
  • Precision eight-segment LED bargraph per channel
  • Front panel main insert jack
  • Front- and rear-mounted headphone jacks
  • XLR and 1/4 inch main inputs and outputs
  • Parallel main outputs for multiple unit use

ART HeadAmp 6 Pro 6-Channel Headphone Amplifier Specifications

  • Input Impedance
    • Balanced Main Input XLR and 1/4-inch TRS Jacks: 40K Ohm Balanced
    • Direct In TRS Jack: 9.9K Ohm
    • Stereo Aux Input TRS Jacks: ≤ 21K to ≥ 15K Ohm
    • CMRR @ 1KHz: ≥ 40dB
  • Output Impedance
    • Headphone output: ≤ 12 Ohms
  • Frequency Response
    • With Tone Controls Set Flat: 20 Hz "" 50 KHz +0, -2dB
    • High Frequency EQ: 12dB @ 10 KHz Shelving
    • Low Frequency EQ: 12dB @ 100 Hz Shelving
  • Maximum Input Level
    • +21.5dBu
  • Dynamic Range
    • Ref: 130mW @ 600 Ohms (unit set to max gain): ≥101 dB (typical)
  • Maximum Gain
    • @ 1KHz With Tone Controls Set To Flat: 25.6 dB
  • Maximum Output Level
    • 600 Ohm Headphones @ 1 KHz: 150 mW
    • 32 Ohm Headphones @ 1 KHz: 500 mW
    • 8 Ohm Headphones @ 1 KHz: 150 mW
  • Dimensions (H x W x D)
    • 1.75 Inches x 19.0 Inches x 7.55 Inches
    • 44.5 mm x 482.6 mm x 190.5 mm
  • Weight: 6.8 lbs. 3.1 kg.
  • Power Requirements
    • Input: USA "" 105-125 VAC AC 60 Hz
    • Consumption: 60 Watts Maximum - 18 Watts Idle
    • Export units configured for country of destination.

ART HeadAmp 6 Pro 6-Channel Headphone Amplifier Downloads

Click here to view all ART products


Average Customer Review 4 of 5 Total Reviews: 1 | Write a review!

  0 of 0 people found the following review helpful:
 
Stout and flexible April 4, 2011
Reviewer: Stephen Trageser from Murfreesboro, TN United States (Bucket City, USA)  
For a situation where you don't need more-mes, this unit is hard to beat. Handles input over a pair of 1/4" TRSs, or a single one if your interface only has headphone outputs.

Allows you to be creative with limited means, too: if you need two cue mixes and you only have a single stereo headphone out, hard-pan the contents of each mix and feed to the single 1/4" TRS input. For everyone who needs the mix on the left, hit the "Mono L" button, and for everyone who needs the mix on the right, "Mono R." Not the ideal situation, but it's nice to have in a bind!

Not to mention that the output level is strong, and has low noise up the very tip-top of the gain range.

Was this review helpful to you?