Rode NT6 Microphone

Rode

(No reviews yet) Write a Review
Product Code: 6954
$429.00
Adding to cart… The item has been added
We Need A Few Days

This item must be ordered in from the manufacturer. Give us a few days to get it here and heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Got Questions? Need Support?

888-228-4530 Contact Us!

The Rode NT6 Microphone is an extremely compact 1/2 inch cardioid condenser microphone, specifically designed for difficult mounting applications where the highest quality audio is required.

The Rode NT6 Microphone is extremely well suited to any situation where a small and unobtrusive, yet powerful microphone system is required.

Although clearly relevant to instrument miking, the Rode NT6 is extremely well suited to any situation where an unobtrusive but powerful microphone is required such as location recording.

The Rode NT6 Microphone is split into two modular components, joined by via a custom 3m (10') shielded, Kevlar® reinforced cable.

Featuring a gold-sputtered, true-condenser capsule, the Rode NT6 capsule head measures 45mm (1.8”) in length and weighs only 42gm (1.5oz). The included all-metal, multi-position mounting ring provides 180 degrees of vertical rotation.

The Rode NT6 preamp-body incorporates both a high-pass filter and pad setting. The high-pass filter can be introduced to cut vibration, rumble and undesired sounds sources under 80Hz, while the PAD offers a -10dB level attenuation, useful when recording louder sound sources.

The Rode NT6's small form factor make it an ideal small diaphragm cardioid microphone for use in the Mid-Side (M/S) stereo array, in combination with a figure-8 large diaphragm microphone such as the NT2-A, NT2000 or K2.

The Rode NT6 is designed and made in Australia, and covered by Rode's industry leading 10 year warranty.

Rode NT6 Microphone Features

  • 1/2” Condenser capsule with remote preamp
  • Gold sputtered externally biased condenser
  • Two position PAD - 0dB and -10dB
  • Two position High Pass Filter - flat and 80Hz
  • Includes two-axis swivel mount, 3m Kevlar® fibre reinforced cable, windshield and zip pouch
  • Heavy duty satin-nickel plated body
  • Low noise and full frequency response
  • Designed and manufactured in Australia

Rode NT6 Microphone Specifications

  • Acoustic Principle: Pressure Gradient
  • Active Electronics: JFET impedance converter with bipolar output buffer
  • Capsule: 0.50"
  • Polar Pattern: Cardioid
  • Address Type: End
  • Frequency Range: 40Hz - 20kHz
  • Output Impedance: 200O
  • Maximum SPL: 135dB SPL (@ 1kHz, 1% THD into 1KO load)
  • Maximum Output Level: 6.0dBu (@ 1kHz, 1% THD into 1KO load)
  • Sensitivity: -37.0dB re 1 Volt/Pascal (16.00mV @ 94 dB SPL) +/- 2 dB @ 1kHz
  • Equivalent Noise Level (A-weighted): 19dB-A
  • Power Options: +24V phantom power, +48V phantom power
  • Weight: 386.00gm
  • Dimensions: 189.00mmH x 64.00mmW x 20.00mmD
  • Output: XLR Output

Rode NT6 Microphone Includes

  • NT6 - Compact 1/2" Condenser Microphone with Remote Capsule
  • RM5 - Durable Microphone Clip
  • ZP1 - Padded Zip Pouch
  • Swivel Mount (2-axis) - 2-axis Swivel Mount
  • 1 Year Warranty (free 10 years extension following registration of your microphone)

No review yet, Be first to Write a Review


What We Think

avatar

The RODE NT6 creates a low-cost option for a small-footprint / low-profile broadcast-worthy small-diaphragm condenser microphone. It's perfect for when you need to get a mic into a tight space or just need to keep the visual impact to a minimum. It's basically a Rode NT5 (well, NT55, actually, since it has both the high-pass filter and pad settings) with the fittings and 10-feet if Kevlar reinforced cabling for getting the capsule remote from it's own preamp. So, you know that the Rode pedigree is there.

Front End Audio, Your Ultimate Pro Audio Dealer

Got questions? Call us at 1-888-228-4530 we are here to help!