Home > Recording > Power Solutions > Distributors & Conditioners >

  Furman SM3-PRO Power Conditioner

Furman SM3-PRO
Furman SM3-PRO
 
List Price: $349.00
Our Price: $349.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-17408

 

Furman SM3-PRO Power Conditioner

The Furman SM3-PRO features Panamax’s revolutionary AVM (Automatic Voltage Monitoring) circuit, and our exclusive Linear Filtering Technology (LiFT).

Together, these technologies comprise precisely what our customers have come to expect from Panamax: uncompromised AC protection and purification. Outlets: Rear panel outlets are controlled in two power filtered banks. They are grouped into two (2) switched banks. BlueBOLT is included, providing secure, hosted IP system control and monitoring for the SM3-PRO.

Remote Power Management technology provides secure, hosted IP (Internet Protocol) system control. With BlueBOLT, custom electronics installers, integrators and end-users can remotely monitor and control power to home theater equipment by accessing power management components from anywhere in the world. From simple system reboots to comprehensive monitoring of power status, BlueBOLT™ provides the power to control complex A/V systems from their most fundamental level: their power source SM3-PRO). In the event of a catastrophic power surge, such as a direct lightning hit, the Panamax unit will disconnect AC power to connected equipment.

Panamax’s patented power monitoring circuitry constantly monitors the AC line voltage for unsafe voltage conditions such as momentary spikes or prolonged over-voltages and under-voltages (brownouts). These unsafe conditions pose a very dangerous threat to all electronic equipment within the home. If the SM3- PRO senses an unsafe power condition, it will automatically disconnect your equipment from the power to protect equipment from damage. Once the voltage returns to a safe level, the SM3-PRO will automatically reconnect the power.

Audio/video systems and networking systems often function best when powered up and down in a sequential manner. In an A/V system, components can be powered up and given a few moments to stabilize before an amplifier or powered subwooofer is turned on, avoiding annoying and potentially dangeroues speaker “thumps” that can occur when all components are turned on simultaneously, or when amplifiers or subwoofers are turned on prior to other equipment. Networking sytems also benefit from sequential turn on as often a modem will need time to boot up prior to turning on a router, switch or other downstream components. The SM3-PRO provides the ability to set turn on delays, turn off delays, and power cycle delays for each bank in the BlueBOLT® or via UDP command. A two-port Ethernet switch is provided for connecting an addirtional Ethernetconnected device without having to run a second LAN cable to the location.

Furman SM3-PRO Power Conditioner Features

  • 15 Amp Capacity
  • 3 Rear Panel Outlets in 2 Controllable and Monitored banks
  • Fully Programmable
  • BlueBolt Enabled
  • AVM & Protect-or-Disconnect Circuitry
  • 2-Port 10/100 Ethernet Switch
  • Linear Filtration,-18.7dB@10kHz, -50.5dB@100kHz, -43.9dB@1MHz
  • Accessory Inputs for External Sensors
  • Rear Panel Circuit Breaker

Furman SM3-PRO Power Conditioner Specifications

  • Operating Voltage: 120 Vac / 60Hz
  • Current Capacity: 15 A
  • UL 1449 Voltage Protection Rating: 330V L-N, 400V L-G, 400V N-G
  • UL 1449 Nominal Discharge Current: 3,000A
  • Initial Clamping Level: 200V
  • Energy Dissipation: 1,575 Joules (8/20µs)
  • Overvoltage shutoff: 134 Vac ± 2 Vac
  • Undervoltage shutoff: 95 Vac ± 2 Vac
  • EMI / RFI Noise Filtration:
    • -18.7dB @ 10kHz
    • -50.5dB @ 100kHz
    • -43.9dB @ 1MHz

Furman SM3-PRO Power Conditioner Includes

  • Furman SM3-PRO Power Conditioner
  • Universal Mounting Bracket Included
  • Detachable 2 ft. Power Cord
  • Manual
  • 3 Year Warranty

Furman SM3-PRO Power Conditioner Downloads

Click here to view all Furman products