| dbx dB10 Passive Direct Box Details
The dbx dB10 is a passive direct box that features
custom dbx mu-metal-shielded audio transformers, high-quality Neutrik
connectors, and low-noise circuitry. The dB10 direct box includes a pad
switch that accommodates instrument, line, and even speaker level
signals. Take even more control of your sound by utilizing the dB10
passive direct box's polarity invert switch to set the phase
relationship between the direct and the mic'd sound.
As a
professional, you don't have time for interference, so dbx includes a
ground lift switch in the db10 passive DI box to solve potential hum
and buzz problems due to ground loops. And between the combined
shielding of the db10's cast metal chassis and the custom-wound
transformer, you can be doubly assured of a clean signal free from
interference. All of this sits atop the dbx dB10 direct box's solid,
stable footprint, that keeps the dB10 box from being dragged around the
stage. The dbx DB10 Passive Direct Box also has a uniquely contoured
underside that allows secure stacking of multiple units.
dbx dB10 Passive Direct Box Features
- Input Section:
- Input: 1 instrument/line/speaker level
- Connector: 1/4" jack
- Type: Unbalanced, RF filtered
- Impedance: 150k Ohm typical
- Max Input Level:
- +20dBu (0dB pad)
- +40dBu (20dB pad)
- +60dBu (40dB pad)
Output Section: - Thru Output: 1 parallel connection from input jack
- Connector: 1/4" jack
- Type: Unbalanced, RF filtered
- Main Output: 1 line level
- Connector: XLR male jack
- Type: Balanced
- Impedance: 150 Ohm typical
- Max Output Level: 0dBu
Performance: - Transformer: Custom dbx mu-metal-shielded
- Frequency Response: 20Hz to 20kHz, ±2.5dB
- Noise: <-105dB unweighted, 22kHz BW
- THD: <0.01%, 20Hz to 20kHz BW
- <0.005%, 1kHz
General: - Dimensions: 5.82" L X 5.44" W X 2.20" H (148 x 138 x 56mm)
- Weight: 1.4 lbs / 0.65 kg
|
