Home > Microphones > Condenser Microphones > Small Diaphragm >

  DPA ST4015C Stereo Microphone Kit

DPA ST4015C
DPA ST4015C
 
List Price: $3,349.95
Our Price: $3,349.95


Availability: Usually Ships in 24 Hours
Product Code: 9999-13570

 

DPA ST4015C Stereo Microphone Kit

DPA ST4015C Stereo Microphone Kit

DPA ST4015C Stereo Microphone Kit Details
Visually discreet, the 4015C Wide Cardioids represent an indispensably low-profile solution for audio engineers and set designers alike. Tremendously precise and natural sounding, the compact wide cardioids will excel when used on choirs, percussion setups, grand pianos, wind instruments, and much more. Also useful as spot mics for classical recording, the 4015C blends very naturally in with the main pair.

The DPA ST4015C is a complete DPA 4015C Stereo Pair with two carefully factory-matched wide cardioid microphones. Even though the standard tolerances on DPA Reference Standards are extremely low, a stereo match is even closer.

The specially selected DPA 4015C microphones are matched within ±1 dB on both frequency response and sensitivity.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays.

DPA ST4015C Stereo Microphone Kit Features
  • Natural reproduction
  • Carefully matched within ±1 dB
  • Low profile " wide pickup area
  • PeliTM Case transportation and protection
DPA ST4015C Stereo Microphone Kit Includes
  • Two carefully matched 4015C wide cardioid microphones
  • sturdy PeliTM case
  • holders
  • windscreens

DPA 4015C Compact Wide Cardioid Microphone Specifications

  • Directional characteristics: Wide cardioid
  • Principle of operation: Pressure gradient
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz to 20 kHz
  • Frequency range, ± 2 dB: 40 Hz to 20 kHz
  • Sensitivity, nominal ± 2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB)
  • Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 76 dB(A)
  • Total Harmonic Distortion (THD): < 1 % up to 139 dB SPL peak
  • Dynamic range: Typ. 121 dB
  • Max. SPL, peak before clipping: 152 dB
  • Minimum load impedance: 2 kohm
  • Output impedance: < 200 ohm
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 50 dB
  • Power supply (for full specifications): 48 V Phantom power (± 4 V)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Weight: 58 g (2 oz)
  • Microphone diameter: 19 mm (0.75 in)
  • Capsule diameter: 19 mm (0.75 in)
  • Length: 64 mm (2.5 in)
  • Output voltage, RMS: > 4 V
  • Polarity: +V at Pin 2 for positive sound pressure
  • Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
  • Relative Humidity (RH): Up to 90 %
  • Matching tolerance: ± 1 dB
  • Phase deviation for kit: < 10°



You may also need...
DPA UA0837 Stereo Boom DPA UA0836 Stereo Boom with Holders DPA DUA0019 Spacer for Stereo Boom DPA UA0897 Shock Mount
Our Price: $569.95

Add
Our Price: $759.95

Add
Our Price: $30.00

Add
Our Price: $340.00

Add
DPA UA0837 DPA UA0836 DPA DUA0019 DPA UA0897