Home > Microphones > Condenser Microphones > Small Diaphragm >

  DPA ST4006A Stereo Microphone Kit

DPA ST4006A
DPA ST4006A
 
List Price: $3,999.95
Our Price: $3,999.95


Availability: Usually Ships in 24 Hours
Product Code: 9999-13573

 

DPA ST4006A Stereo Microphone Kit

DPA ST4006A Stereo Microphone Kit

DPA ST4006A Stereo Microphone Kit Details
The DPA ST4006A is a complete DPA 4006A Stereo Pair with two carefully factory-matched omni microphones. Even though the standard tolerances on DPA Reference Standards are extremely low, a stereo match is even closer.

The specially selected DPA 4006A microphones are matched within ±0.5 dB on both frequency response and sensitivity. The maximum phase response difference is 5°.

The natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB) of the microphone pair makes the ST4006A the perfect choice for all AB Stereo recordings. The design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory foam inlays.

DPA ST4006A Stereo Microphone Kit Features
  • carefully matched microphones
  • high sensitivity, low noise-floor and extremely linear frequency
  • PeliTM case transportation and protection
DPA ST4006A Stereo Microphone Kit Includes
  • Two carefully matched 4006A omni microphones
  • sturdy PeliTM case
  • holders
  • grids
  • windscreens

DPA 4006A Omnidirectional Microphone Specifications

  • Directional characteristics: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 10 Hz to 20 kHz
  • Frequency range, ± 2 dB: 10 Hz to 20 kHz
  • Sensitivity, nominal, ±2 dB at 250 Hz: 40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 79 dB(A)
  • Total Harmonic Distortion (THD): < 1 % up to 139 dB SPL peak
  • Minimum load impedance: 2 kohm
  • Dynamic range: Typ. 124 dB
  • Max. SPL, peak before clipping: 147 dB
  • Switchable attenuator: 0 dB / -20 dB
  • Output impedance: < 200 ohm
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 60 dB
  • Power supply (for full specifications): 48 V Phantom power (± 4 V)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Weight: 163 g (5.7 oz)
  • Diameter: 16 to 19 mm (0.63 to 0.75 in)
  • Capsule diameter: 16 mm (0.63 in)
  • Length: 170 mm (6.7 in)
  • Output voltage, RMS: > 5 V
  • Polarity: +V at Pin 2 for positive sound pressure
  • Temperature range: -40 °C to 50 °C (-40 °F to 122 °F)
  • Relative Humidity (RH): Up to 90 %
  • Classification: Conforms to IEC 61672 Class I (with Near-field Grid DD0251)
  • Matching tolerance: ± 0.5 dB
  • Phase deviation for kit: < 5°



You may also need...
DPA DUA0019 Spacer for Stereo Boom DPA UA0837 Stereo Boom DPA UA0897 Shock Mount DPA UA0836 Stereo Boom with Holders
Our Price: $30.00

Add
Our Price: $569.95

Add
Our Price: $340.00

Add
Our Price: $759.95

Add
DPA DUA0019 DPA UA0837 DPA UA0897 DPA UA0836