DPA 5006-11A Surround Microphone Kit

DPA

(1 review) Write a Review
Product Code: 9999-13835
$11,300.00
Adding to cart… The item has been added
Ships From Manufacturer

This item ships directly to you from the manufacturer so give us a day or two to get it heading your way. Go ahead and place your order and we will let you know as soon as it ships. If you have a deadline then please contact us before placing the order so we can meet your expectations.

Got Questions? Need Support?

888-228-4530 Contact Us!

The DPA 5006-11A Surround Microphone Kit combines carefully factory-matched microphone for full precision. The high sensitivity, and extremely linear frequency response makes it perfect choice for all AB Stereo, Decca Tree or surround main array recordings.

The DPA 5006-11A Surround Microphone Kit is a complete surround kit combining three 4006A Omnidirectional Microphones and two 4011A Cardioid Microphones, carefully factory-matched to achieve full precision. Even though the standard tolerances on DPA's pencil mics are extremely low, the surround match is even closer. The specially-selected 4006As are matched within ±0.5 dB on both frequency response and sensitivity. The 4011As are matched within ±1 dB. The natural sound, high sensitivity, low noise-floor and extremely linear frequency response from 10 Hz to 20 kHz (±2 dB) of the microphones make the 4006A Omnidirectional Microphones the perfect choice for all AB Stereo, Decca Tree or surround main array recordings.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone / accessory inlays.

DPA 5006-11A Surround Microphone Kit Features

  • Five carefully matched microphones (three 4006A and two 4011A)
  • Useful as orchestral main pair
  • Peli Case transportation and protection

DPA 5006-11A Surround Microphone Kit Specifications

  • DPA 4006A Omnidirectional Microphone:
    • Directional Pattern: Omnidirectional
    • Principle of Operation: Pressure
    • Cartridge Type: Pre-Polarized Condenser
    • Frequency Response: 10 Hz - 20 kHz
    • Effective Frequency Range ±2 dB: 10 Hz - 20 kHz
    • Sensitivity, Nominal, ±2 dB at 250 Hz: 40 mV/Pa; -28 dB re. 1 V/Pa
    • Equivalent Noise Level, A-Weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
    • Equivalent Noise Level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
    • Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL Peak
    • Dynamic Range: Typ. 124 dB
    • Max. SPL, THD 10%: 146 dB SPL Peak
    • Switchable Attenuator, Filters etc.: 0 dB / -20 dB
    • Rated Output Impedance: 200 O
    • Minimum Load Impedance: 2 kO
    • Cable Drive Capability: 100 m (328 ft)
    • Output Balance Principle: Impedance Balancing with Active Drive
    • Common Mode Rejection Ratio (CMRR): > 60 dB
    • Power Supply (for Full Performance): P48 (Phantom Power)
    • Current Consumption: 2.8 mA
    • Connector: XLR-3M. Pin 1: Shield, Pin 2: Signal + Phase, Pin 3: - Phase
    • Color: Matte Black
    • Weight: 163 g (5.7 oz)
    • Microphone Diameter: 16 - 19 mm (0.6 - 0.75 in)
    • Capsule Diameter: 16 mm (0.6 in)
    • Microphone Length: 170 mm (6.7 in)
    • Maximum Output Voltage, RMS: 8.0 V
    • Polarity: +V at pin 2 for Positive Sound Pressure
    • Temperature Range: -40°C to 45°C (-40°F to 113°F)
    • Relative Humidity (RH): Up to 90 %
    • Matching Tolerance (Frequency Response and Sensitivity): ±0.5 dB
    • Phase Deviation for Kit: < 5°
  • DPA 4011A Cardioid Microphone:
    • Directional Pattern: Cardioid
    • Principle of Operation: Pressure Gradient
    • Cartridge Type: Pre-polarized Condenser
    • Frequency Response: 20 Hz - 20 kHz
    • Effective Frequency Range, ±2 dB, at 30 cm (11.8 in): 40 Hz - 20 kHz
    • Sensitivity, Nominal, ±2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
    • Equivalent Noise Level, A-weighted: Typ. 18 dB(A) re. 20 µPa (max. 20 dB(A))
    • Equivalent Noise Level, ITU-R BS.468-4: Typ. 25 dB (Correct with the Attenuator in 0 dB or -20 dB Setting)
    • Distortion, THD < 1%: 136 dB SPL RMS, 139 dB SPL Peak
    • Dynamic Range: Typ. 121 dB
    • Max. SPL, THD 10%: 159 dB SPL Peak
    • Switchable Attenuator, Filters etc.: 0 dB / -20 dB
    • Rated Output Impedance: 200 O
    • Minimum Load Impedance: 2 kO
    • Cable Drive Capability: 100 m (328 ft)
    • Output Balance Principle: Impedance Balancing with Active Drive
    • Common Mode Rejection Ratio (CMRR): > 60 dB
    • Power Supply (for full Performance): P48 (Phantom Power)
    • Current Consumption: 2.8 mA
    • Connector: XLR-3M. Pin 1: shield, Pin 2: Signal + Phase, Pin 3: - Phase
    • Color: Matte Black
    • Weight: 158 g (5.6 oz)
    • Microphone Diameter: 19 mm (0.75 in)
    • Capsule Diameter: 19 mm (0.75 in)
    • Microphone Length: 170 mm (6.7 in)
    • Maximum Output Voltage, RMS: > 5 V
    • Polarity: +V at Pin 2 for Positive Sound Pressure
    • Temperature Range: -40°C to 45°C (-40°F to 113°F)
    • Relative Humidity (RH): Up to 90%
    • Matching Tolerance (Frequency Response and Sensitivity): ±1 dB
    • Phase Deviation for Kit: < 10°

DPA 5006-11A Surround Microphone Kit Includes

1 Review Hide Reviews Show Reviews

  • 5
    Great Buy
    Daniel Herman

    This exact kit sells for $9,500 on B&H, and Front End has it for $1,200 less. Pretty simple choice. If you're spending eight grand on mics you probably know what you're looking for, and Front End shipped the kit out quickly and just as described.