Chandler Limited LTD-1 Microphone Preamp/EQ Details

The Chandler Limited LTD-1 is a hand wired 10-series equalizer and pre amp that has been handmade using parts and build techniques from the original manufacture of the modules. Grounding, wiring techniques, original transformers, transistors, inductors, and much more attribute to the special sound of these units and have been painstakingly recreated in each LTD-1.

In addition to the classic 10-series sound we add all the modern functions you expect and expand the EQ section giving you much larger palate to choose from. Features include high impedance direct in, 48v switching, output fader, eq in/out, phase reverse, balanced mic in, balanced line in, over built power supply to ensure maximum headroom, and nine additional eq points.

This Chandler Limited unit requires a PSU-1 Power Supply. The PSU-1 can power two Chandler units.

Chandler Limited LTD-1 Microphone Preamp/EQ Features

• 48 volt switching DI in/out: also acts as a mute for the mic in.
• EQ in/out
• Phase reverse
• Filter: This is a high pass characteristic at 300hz, 160hz, 80hz, and 50hz. These are the same settings as vintage modules.
• Low EQ: This is a low-end shelving characteristic with four selections - 220hz, 110hz, 60hz, 35hz. These are the same as found on classic 10-series.
• Mid EQ: This is a mid-frequency peaking characteristic with ten selections. 270hz, 390hz, 560hz, 820hz, 1k2, 1k8, 2k7, 3k9, 5k6, 8k2 (classic 10-series had 360hz, 700hz, 1k6, 3k2, 4k8, 7k2).
• High EQ: A high end shelving characteristic with five selections - 16k, 12k, 6k8, 4k7, 3k3 (classic 10-series had only 12k).
• Mic/Line Input Sensitivity: -20 to 80db mic gain. -10 to +20db line.
• Output: This functions as the fader on a mixing console. Use it to adjust between the 5db steps of the input or to run the input hot without distorting your recorder (for extra coloration).

Chandler Limited LTD-1 Microphone Preamp/EQ Downloads

• LTD-1 Brochure
• LTD-1 Manual
• LTD-1 Recall Sheet

Click here to view all Chandler Limited products