Home > Recording > Signal Processors > Line Utility >

Avenson Audio Blend Parallel Processing Tool

Avenson Audio Blend
Avenson Audio Blend
 
Alternative Views:


List Price: $699.00
Our Price: $600.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-09395



The following items are included FREE:

 

Avenson Audio Blend Parallel Processing Tool

The Avenson Audio Blend makes it unbelievably easy to inject analog parallel processing, into your studio's set up. The short clean signal path ensures the integrity of your audio, and the simple one fader control allows you to blend between fully dry, fully wet, and any point in between.

The Avenson Audio Blend is a two source stereo mixer that operates as a cross fader between the sources. This is an ideal tool to use for parallel processing or to quickly mix a couple sources while tracking. The polarity feature allows you to flip the phase 180 degres on the B (or wet) input to either correct a cabling issue or to null or cancel the input.

The Stereo 16 segment output LED meters allow you to see your levels clearly and the 100mm fader gives you very fine level control. All the Input and Outputs are balanced on 0.25″ TRS connectors. The A (or Dry) inputs are copied to an A (or Dry) output to allow you to loop through the Blend similar to a patchbay.

The Avenson Audio Blend is housed in an attractive half rack width enclosure with an optional stainless steel rack shelf and ready to add more processing power to your racks.

Avenson Audio Blend Parallel Processing Tool Features

  • Allows you to use compressors, equalizers, distortion, or other effects in a parallel fashion with the original "clean" signal you give it AND the ability to blend between the two to taste.
  • 100mm Fader
  • Polarity Reverse on B-Input
  • Inputs: 2 x Balanced 1/4" TRS connectors each for A and B inputs
  • Outputs: 2 x Balanced 1/4" TRS connectors each for A and B outputs

Avenson Audio Blend Parallel Processing Tool Specifications

  • Input Overload Level:
    • +22 dbu (0.1% THD) for LR in
    • +27dbu (0.1% THS) for MS in
  • Gain: -0.2 dB
  • Frequency Response: 5 Hz (-0.2db) - 91 kHz (-2 db)
  • Signal to Noise: ≥ 115 dB 100kHz bandwidth
  • Power Requirements: 85-260 VAC 50/60 Hz <10W
  • Size: 8.55 x 1.75 x 6.3 inches / 217 x 45 x 160 mm
  • Weight: 2.7 lbs (1.18 kg)

Avenson Audio Blend Parallel Processing Too Includes

  • Avenson Audio Blend
  • Power Cable
  • Manual
  • One Year Warranty

What We Think

The Avenson Audio Blend could not make it any easier to incorporate analog parallel processing in your studio. All you have to do is set up the dry and wet stereo inputs and outputs, turn the Blend on, and adjust the single fader to taste (blending the wet [effected] signal with the dry signal). Whether applying parallel compression to a drum bus, reverb to a group vocal, or any creative applications you can think up - the Blend gets it done. Furthermore, the build quality is solid.

- Ryan

Click here to view all Avenson Audio products


You may also need...
Avenson Audio Mid-Side Stereo Processor Avenson Audio Blend/Mid-Side Rack Shelf
Our Price: $600.00

Add
Our Price: $45.00

Add
Avenson Audio Mid-Side Avenson Audio Rack Shelf