Home > Rack Gear > Preamps >

Weiss A1 500-Series Preamp & De-Esser
Weiss A1
Weiss A1
 
List Price: $1,855.00
Our Price: $1,545.00


Availability: Usually Ships in 1 to 2 Weeks
Product Code: 1071

 

Weiss A1 500-Series Preamp & De-Esser

The Weiss A1 500-Series Preamp & De-Esser is an analog input/output product featuring state-of-the-art microphone/line pre-amplifier with a de-esser for stereo operation.

The Weiss A1 500-Series Preamp & De-Esser is the Weiss' first analog input/output only product, incorporating a microphone/line pre-amplifier with a de-esser in the popular API 500 Series format. The side-chain of the de-esser uses a DSP – unique but advantageous for the precision of the side-chain and enabling the use of a very low noise gain element. Two modules can be side-chain linked for stereo operation.

The Weiss A1 has a transformer balanced wide level range input with a pad for line level sensitivity. The input gain is set with a sixteen position switch. A low cut filter is useful for microphone work. Phantom power can be switched on or off.

The output is also transformer balanced and has an additional potentiometer to set the output level independently from the levels the de-esser is running at. A polar its switch allows to change the absolute polarity of the output signal.

The de-esser section uses a bandpass filter to split the audio band. The bandpass filter parameters are the center frequency and the Q. The Threshold parameter defines the sensitivity of the de-esser side-chain. A few attack and release times and ratios can be selected via DIP switches at the bottom of the Weiss A1. An LED indicates whether there is any gain-reduction happening and a “listen” switch allows to listen to the signal filtered by the band-pass. Useful to zoom in on e.g. specific sibilances. The de-esser can be bypassed with a switch. Several LEDs allow to monitor the input and output levels.

Input, Pre-amplifier

The Weiss A1 microphone pre-amplifier stage uses a transformer-balanced, discrete, class A design with a current-feedback amplifier architecture for low distortion and wide bandwidth across the full gain range. The pre-amplifier sports very low noise for a wide range of source impedances, across the full gain range. The gain is variable in 3 dB steps between 15 and 60 dB. A 24 dB pads allows to feed line levels as well. A high pass filter can be switched in. The corner frequency can be selected to be 40 or 80 Hz.

De-esser

The de-esser section uses an advanced mixed signal design: The direct signal path is fully analog while the side-chain works in the digital domain. This enables the use of a low distortion precision MDAC (Multiplying D/A Converter) as the variable gain element. The side-chain is built for very low latency, using a 500 kHz sampling frequency.

Front Panel Controls

The front panel controls for the de-esser section are knobs for frequency, bandwidth and threshold. Further parameters (ratio, attack and release time) can be set via DIP switches.

Output

The output also uses a transformer balanced design with a high maximum output level of +27 dBu. An additional output gain potentiometer allows to set the output level in a wide range.

Weiss A1 500-Series Preamp & De-Esser Features

  • Mic Preamp stage uses a high-quality input transformer and a discrete class A amplifier with variable gain
  • Input transformer & Amp are optimized for very low noise achieved with a wide range of sources and gain setting
  • De-esser section uses a bandpass filter to split the audio band
  • A few attack and release times and ratios can be selected via DIP switches
  • De-esser can be bypassed with a switch
  • Several LEDs allow to monitor the input and output levels
  • Front panel controls for the de-esser section are knobs for frequency, bandwidth and threshold
  • Output stage uses a transformer balanced design with a high maximum output level of +27 dBu
  • Output gain potentiometer allows to set the output level in a wide range

Weiss A1 500-Series Preamp & De-Esser Specifications

  • Input:
    • Input Gain Range, Pad Off: +15 dB to +60 dB, 3 dB steps
    • Pad Attenuation: 24 dB
    • Max. Input Level at Minimum Input Gain, Pad On: +29.7 dBu (for THD+N = -80 dB)
    • Input Impedance at 1 kHz, Pad Off: 8.4 kO
    • Input Impedance at 1 kHz, Pad On: 2.8 kO
  • Output:
    • Output Gain Range: -8 dB to +12 dB, continuous
    • Max. Output Level, 100 kO load: +27.0 dBu (for THD+N = -80 dB)
    • Output Impedance at 1 kHz: 290 O
  • Power:
    • Compatibility: With API Series 500 Power racks
    • Current Consumption ±16 V Supply: = 150 mA
    • Current Consumption +48 V Supply: = 15 mA
  • Size:
    • Depth: 15 cm
    • Width: 3,8 cm (1 slot)
    • Height: 13,3 cm

Weiss A1 500-Series Preamp & De-Esser Includes

  • Weiss A1 Unit
  • Printed Owners manual

Weiss A1 500-Series Preamp & De-Esser Downloads

Click here to view all Weiss products