Home > Microphones > Dynamic Microphones >

Placid Audio Copperphone Microphone

Placid Audio Copperphone
Placid Audio Copperphone
 
List Price: $259.00
Our Price: $259.00


Availability: Usually Ships in 24 Hours
Product Code: 9999-17026

 

Placid Audio Copperphone Microphone

The Placid Audio Copperphone Microphone is unlike any full range microphone you have heard, it operates within a limited bandwidth of frequencies which lends a nostalgic quality to the signal. Some might compare the sound of the Copperphone to an AM radio or a telephone.

The sound is achieved through a combination of the microphone’s element and a mechanical filtering device. The element is rear ported into a hollow resonant chamber and as sound passes through the diaphragm into the chamber, upper mid range frequencies are accentuated while low and high frequencies are reduced.

The Placid Audio Copperphone does not use phantom power as it has a passive dynamic element. It uses a Switchcraft 3 pin male XLR connector and can be connected to any audio gear with a 3 pin female XLR connector via an XLR cable. Accidentally applying phantom power will not harm the microphone or affect its performance.

Because the sound of the Placid Audio Copperphone has a character unlike many other traditional mics, it makes a great addition to any recording enthusiast’s arsenal of microphones. It can be used as an all out obvious ‘effect’ on it’s own or it can be paired with other traditional microphones for infinite blending possibilities.

The Placid Audio Copperphone can be used live as a specialty effects mic in conjunction with regular microphones. As with any microphone, feedback can be an issue. Results will vary depending on the application, the overall volume of your band, the quality of the sound system and the experience of the engineer running the sound system. However very careful adjustment and equalization of the Copperphone in the monitors can yield acceptable results. If you use an in ear monitor system, potential feedback problems are usually not an issue.

The Placid Audio Copperphone is constructed from quality rugged materials and is likely to withstand a high degree of shock or other physical impacts. The Copperphone can also withstand extremely high sound pressure levels without damage to the diaphragm. However a high SPL is likely to overdrive the diaphragm resulting in a clipping style distortion that may be desired for some applications.

Placid Audio Copperphone Microphone Features

  • Passive magnetic moving coil transducer
  • Tuned ported resonant chamber
  • High quality Switchcraft 3 pin XLR connector
  • Rugged copper housing and components
  • Adjustable aircraft aluminum mounting bracket to fit North American style stands (will fit European style stands with common threaded adapter)
  • Handcrafted in the U.S.A
  • Lifetime operational warranty

Placid Audio Copperphone Microphone Specifications

  • Type: Dynamic
  • Polar Pattern: Cardioid
  • Frequency Response: 200Hz – 3kHz
  • Impedance: 150 ohms
  • Output: 115 +/- 2dB SPL @ 1 kHz
  • Dimensions: 2.5 inch x 6 inch
  • Weight: 1.75 lbs.

Click here to view all Placid Audio products


Average Customer Review 5 of 5 Total Reviews: 2

| Write a review!


  0 of 0 people found the following review helpful:
 
fast shipping...good mic April 20, 2016
Reviewer: will walker from ypsilanti, MI United States  
thanks!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Simple and Lot of Fun! July 20, 2015
Reviewer: Chi Ho Choi from Tuen Mun, NT Hong Kong  
It's a simple mic with tones of character. I thought it'd just sound like a mic with hi and low roll off, but it's more then that, it gives the immediate effect and very inspiring!

Was this review helpful to you?