Hear Technologies Hear Back Four Pack at FrontEndAudio.com

Hear Technologies Hear Back Four Pack Details

This complete Hear Technologies Hear Back Four Pack system consists of a Hear Back Hub and FOUR personal Hear Back Mixers connected using the included CAT5e cables. For connecting to analog sources, a DA88 style D-Sub to 1/4 TRS cable is also included. But the system can also accept signal from ADAT Optical.

As for expandability, a single Hear Back Hub supplies signal and power to a maximum of eight Mixers. If that’s not enough, the Hubs can be daisy-chained using the HearBus In/Out for virtually unlimited system size. The Hub can accept analog input signals from audio mixers, auxiliary, matrix, monitor, and/or direct outputs. The ADAT input can come from digital audio workstations, digital recorders, or digital mixers.

For front of house or remotely located digital mixers, we also carry the Extreme Extender ADAT In and the Extreme Extender ADAT Out that, together converts ADAT optical, which normally has a very limited distance, to and from HearBus CAT5e for transmission of up to 500 feet.

Here are some of the benefits of the Hear Back system:

Virtually unlimited system size
Very attractive pricing
Excellent audio fidelity
Built-in DSP Limiter
Very long digital lines possible without loss of audio quality
Audio inputs ADAT, analog, and the HearBus are switch selectable from the front panel.
Local control of up to ten channels of audio (8 inputs plus a stereo Aux input) Master Volume (controls the level to the headphones, line outs and the Aux input to the line outputs)
Built-in DSP Limiter (designed as a “brick wall” limiter for hearing protection and to protect monitor wedges from overload)
Headphone amplifier fault indicator in case of over temperature, or a short, the red LED comes on to alert the user something is a problem.
A second visual trouble shooting aid for the user is the Bus status indicator
Link Indicators – Whenever two pairs of mono inputs are linked for stereo operation the link LED is illuminated
Standard CAT5E power and signal Connection, cost effective, simple, non-obtrusive way to connect eight channels of audio. The Cable is held in place with a “built-in cable strain relief”
Balanced Line-Outs, Mono/Stereo
Stereo AUX In
Built-in Mic Stand Mount may be mounted to a standard mic stand or clipped onto a stand extension bar or clip
High Power – Low Distortion Headphone Amplifiers
One of the industry's most powerful headphone amplifiers

Hear Technologies Hear Back Four Pack Features

Three switch selectable 8-channel input sources:
- ADAT Optical
- Analog
- HearBus
24-bit A/D converters
Digital inputs: 44.1KHz and 48 KHz sample rates
Less than 1.5 milliseconds system delay
3-LED four-level metering
Standard CAT5E - delivers power and signals to mixers
Daisy-chain for very large systems
Internal universal input power supply
1 RU chassis

Hear Technologies Hear Back Four Pack Includes

4 x Hear Back Mixers
1 x Hear Back Hub
4 x 50 foot CAT5e cables
1 x Hear Back analog DA-88 style cable

Hear Technologies Hear Back Four Pack Downloads

What We Think - Hear Technologies Hear Back Review

"So you’ve got all the high end mics, preamps, cables, acoustic treatment…yada yada yada. And maybe you forgot about the most important thing, hearing your music! Hear Technologies and Front End Audio provide excellent tools to really hear what’s going on. Your clients deserve to hear what they need to hear, your bandmates deserve a good monitor mix too. You can try to 'Frankenstein' your own system, or go with the guys who do one thing and do it the best. The Talkback, Mix Back and Hear Back systems are outstanding, clean systems that provide specific solutions for what you need. The support from Hear Technology is TOP NOTCH as well, from setup advice and planning to real support after the sale! Let us know your monitoring needs and we’ll serve up the correct solution on a silver platter."

Click here to view all Hear Technologies products