Furman M-8X2 Power Conditioner

Furman

(2 reviews) Write a Review
Product Code: 9999-03211
$119.95
Adding to cart… The item has been added
In Stock

This item is in stock and will ship the same day if ordered prior to 3pm EST Monday - Friday. Otherwise, it will ship the next business day.

Got Questions? Need Support?

888-228-4530 Contact Us!

The Furman M-8X2 Power Conditioner is the perfect low-cost AC power solution for any rack mount system. Featuring ture excellent surge protection as well as RFI / EMI AC noise filtration, the M-8X2 is designed for applications where lights are not required.

The Furman M-8X2 Power Conditioner provides 9 switched outlets for powering equipment. It not only protects anything plugged into it from spikes and surges, but also has a built in AC noise filter to rid the system of RFI/EMI interference. This allows equipment to function better and last longer. Install the Furman M-8X2 in to the top slot of your rack, and the eight switched outlets in the rear panel will power up and protect all your equipment up to a 15-amp load. The M-8X2 is a Merit Series Power Conditioner, the perfect low-cost AC power solution for any rack mount system. The Furman M-8X2 Power Conditioner is designed for applications where lights are not required.

Furman M-8X2 Power Conditioner Features

  • Noise Filtration: AC noise filtering to reduce radio frequency and electromagnetic interference (RFI/EMI)
  • Surge Protection: Spike & surge protection ensures equipment stays safe and your power stays clean
  • 9 Total Outlets: 8 rear panel outlets and 1 front panel outlet
  • 15 Amp Rating: 15 amp rating, with circuit breaker
  • "Protection OK" Indicator: Front panel indicator LED lets you know that your equipment is being protected
  • Wall Wart Spacing Indicator: Rear outlets have been spaced to accommodate even the bulkiest of wall warts and adapters

Furman M-8X2 Power Conditioner Applications

  • Instrument Rigs - You've got a rack for your effects, preamps, tuner...You're going to plug that into the wall? One big spike and your rig is up in smoke. Furman's standard level surge/spike protection defends your gear from the spikes and surges that are so common at gigs and practice spots. With Furman's standard level RFI/EMI filtration, you'll get a quieter tone without pops, crackles, and the local radio station coming out of your amp.
  • Recording - Can't track down where that noise is coming from? Your mix sounding flat? With Furman's standard level RFI/EMI filtration you'll lower the noise floor caused by the dirty AC power coming into your console or DAW. Furman's standard level surge and spike protection keeps your sensitive digital equipment from acting funny or burning up due to everyday spikes and surges. With a 15A capacity and nine total outlets, it's enough to power your whole home studio.
  • DJ Equipment - Bars, clubs and other event venues have some of the worst power out there - from air compressors turning on and off to light shows pulling current loads up and down, the AC power can be a strain on the circuits in your rig. Furman's standard level protection and filtration keeps the bad stuff out.
  • Pro Audio - When you're out there gigging, you never know what kind of power you're going to get. The wear and tear on mobile rigs eventually takes it toll - that's why it's smart to plug into Furman's standard level protection and RFI/EMI filtration. It keeps your equipment safe and sounding clean. Whether you're setting up a show at the local club or powering up the church band for their next service, make sure you give them power they can trust.

Furman M-8X2 Power Conditioner Specifications

  • Maximum Output Current: 15 amps
  • Line Cord: 6 ft., captive, 14 AWG, with 3-conductor Edison plug
  • Operating Voltage: 120VAC 60Hz
  • Spike Protection Mode: Line to neutral
  • Energy Dissipation: 170 joules
  • Peak Impulse Current: 12,000 Amps
  • Maximum Continuous Opterating Voltage: 130 VAC RMS
  • Let Through Voltage (@ 125 amps, 8/20uS waveform): 400 volts
  • Noise Attenuation: Transverse mode: Greater than 23dB, 200Khz to 10 Mhz
  • Dimensions: 1.75" H x 19" W x 3.75" D
  • Weight: 4.9 lbs.
  • Safety Agency Listing: cTUVus

Furman M-8X2 Power Conditioner Includes

  • Furman M-8X2 Power Conditioner
  • User Manual
  • 3 Years Warranty

2 Reviews Hide Reviews Show Reviews

  • 5
    FURMAN M-8X2 POWER CONDITIONER
    MICHAEL BAILEY

    I bought this primarily for organization of my power cords in my rack, and it worked great for that, I have it mounted near the bottom of the rack and my equipment plugged into it. From there the rack goes to a UPS with battery backup. I have had no noise issues or any other problems with this unit, it is small, and solid with an on/off switch in the front and an LED power indicator. If you truly need serious power filtering, you will need something a lot more expensive than this, but for now it is suiting my needs and I would buy more of these, or if needed a regulator unit from Furman and Front End Audio.

  • 3
    They help clean my cabling up
    Alex

    I can't really speak to if these are doing much "conditioning" for the power, they're so light that I doubt there is much going on inside. BUT! I have 3 in my studio to help make my power up and down easy as well as keeping my power cables tidy by not having everything go to one place. I would guess a true conditioner will do more, but these are definitely handy.