Home > Microphones > Condenser Microphones > Small Diaphragm >

  DPA ST4011A Stereo Microphone Kit

DPA ST4011A
DPA ST4011A
 
List Price: $3,659.95
Our Price: $3,659.95


Availability: Usually Ships in 24 Hours
Product Code: 9999-13778

 

DPA ST4011A Stereo Microphone Kit

DPA ST4011A Stereo Microphone Kit

DPA ST4011A Stereo Microphone Kit Details
4011A cardioids are exceptionally linear in their frequency response " also off axis, giving you the natural experience. They handle extremely high SPL and will therefore allow for close placement and are often used for piano recordings with a placement closer to the hammers or as overheads for drums.

The DPA ST4011A is a complete DPA 4011A Stereo Pair with two carefully factory-matched first order cardioid microphones. Even though the standard tolerances on DPA Reference Standards are extremely low, a stereo match is even closer.

The specially selected DPA 4011A microphones are matched within ±1 dB on both frequency response and sensitivity.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlay.

DPA ST4011A Stereo Microphone Kit Features
  • World-wide cardioid reference mic
  • Handles very high sound pressure levels
  • Carefully matched within ±1 dB
  • PeliTM Case transportation and protection
DPA ST4011A Stereo Microphone Kit Includes
  • Two carefully matched 4011A cardioid microphones
  • sturdy PeliTM case
  • holders
  • windscreens

DPA 4011A Cardioid Microphone Specifications

  • Directional characteristics: Cardioid
  • Principle of operation: Pressure gradient
  • Cartridge type: Pre-polarized condenser
  • Frequency range: 20 Hz to 20 kHz
  • Frequency range, ±2 dB: 40 Hz to 20 kHz
  • Sensitivity, nominal ±2 dB at 1 kHz: 10 mV/Pa; -40 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted, re. 20 µPa: Typ. 18 dB(A) re. 20 µPa (max. 20 dB)
  • Equivalent noise level, ITU-R BS.468-4: Typ. 25 dB (correct with the attenuator in 0 dB or -20 dB setting)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 76 dB(A)
  • Total Harmonic Distortion (THD): < 1 % up to 139 dB SPL peak
  • Minimum load impedance: 2 kohm
  • Dynamic range: Typ. 121 dB
  • Max. SPL, peak before clipping: 159 dB
  • Switchable attenuator: 0 dB / -20 dB
  • Output impedance: < 200 ohm
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 60 dB
  • Power supply (for full specifications): 48 V Phantom power (± 4 V)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Weight: 158 g (5.6 oz)
  • Microphone diameter: 19 mm (0.75 in)
  • Capsule diameter: 19 mm (0.75 in)
  • Length: 170 mm (6.7 in)
  • Output voltage, RMS: > 5 V
  • Polarity: +V at Pin 2 for positive sound pressure
  • Temperature range: -40 °C to 45 °C (14 °F to 113 °F)
  • Relative Humidity (RH): Up to 90 %
  • Matching tolerance: ± 1 dB
  • Phase deviation for kit: < 10°


You may also need...
DPA UA0837 Stereo Boom DPA UA0836 Stereo Boom with Holders DPA DUA0019 Spacer for Stereo Boom DPA UA0897 Shock Mount
Our Price: $569.95

Add
Our Price: $759.95

Add
Our Price: $30.00

Add
Our Price: $340.00

Add
DPA UA0837 DPA UA0836 DPA DUA0019 DPA UA0897