Home > Microphones > Condenser Microphones > Small Diaphragm >

  DPA ST4006C Stereo Microphone Kit

DPA ST4006C
DPA ST4006C
 
List Price: $3,709.95
Our Price: $3,709.95


Availability: Usually Ships in 24 Hours
Product Code: 9999-13574

 

DPA ST4006C Stereo Microphone Kit

DPA ST4006C Stereo Microphone Kit

DPA ST4006C Stereo Microphone Kit Details
Wherever a small, lightweight, inconspicuous microphone for top-quality recording is required, the compact design and clean, transparent sound of our versatile 4006C makes it the perfect choice. Particularly popular as A-B stereo pairs in concert halls where quality recordings can sometimes be compromised by classic architecture, the 4006C?s can be mounted, hung or concealed to create clean, transparent recordings.

The DPA ST4006C is a complete DPA 4006C Stereo Pair with two carefully factory-matched omni microphones. Even though the standard tolerances on DPA Reference Standards are extremely low, a stereo match is even closer.

The specially selected DPA 4006C microphones are matched within ±0.5 dB on both frequency response and sensitivity. The maximum phase response difference is 5°.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays.

DPA ST4006C Stereo Microphone Kit Features
  • carefully matched microphones
  • compact size and natural sound
  • full-bodied sound from a small-bodied mic
  • PeliTM Case transportation and protection
DPA ST4006C Stereo Microphone Kit Includes
  • Two carefully matched 4006C omni microphones
  • sturdy PeliTM case
  • holders
  • grids
  • windscreens

DPA 4006C Compact Omnidirectional Microphone Specifications

  • Directional characteristics: Omnidirectional
  • Principle of operation: Pressure
  • Catridge type: Pre-polarized condenser
  • Frequency range: 10 Hz to 20 kHz
  • Frequency range, ± 2 dB: 20 Hz to 20 kHz
  • Sensitivity, nominal ±2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 15 dB(A) re. 20 µPa (max. 17 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 27 dB (max. 29 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 79 dB(A)
  • Total Harmonic Distortion (THD): < 1 % up to 134 dB SPL peak
  • Dynamic range: Typ. 119 dB
  • Max. SPL, peak before clipping: 140 dB
  • Minimum load impedance: 2 kohm
  • Output impedance: < 200 ohm
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 50 dB
  • Power supply (for full specifications): 48 V Phantom power (± 4 V)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Weight: 63 g (2.2 oz)
  • Diameter: 16 to 19 mm (0.63 to 0.75 in)
  • Capsule diameter: 16 mm (0.63 in)
  • Length: 64 mm (2.5 in)
  • Output voltage, RMS: > 4 V
  • Polarity: +V at Pin 2 for positive sound pressure
  • Temperature range: -40 °C to 45 °C (14 °F to 113 °F)
  • Relative Humidity (RH): Up to 90%
  • Matching tolerance: ± 0,5 dB
  • Phase deviation for kit: < 5°


You may also need...
DPA UA0897 Shock Mount DPA DUA0019 Spacer for Stereo Boom DPA UA0836 Stereo Boom with Holders DPA UA0837 Stereo Boom
Our Price: $340.00

Add
Our Price: $30.00

Add
Our Price: $759.95

Add
Our Price: $569.95

Add
DPA UA0897 DPA DUA0019 DPA UA0836 DPA UA0837