Home > Microphones > Condenser Microphones > Small Diaphragm >

  DPA ST2006C Stereo Microphone Kit

DPA ST2006C
DPA ST2006C
 
List Price: $1,739.95
Our Price: $1,739.95


Availability: Usually Ships in 24 Hours
Product Code: 9999-13866

 

DPA ST2006C Stereo Microphone Kit

DPA ST2006C Stereo Microphone Kit

DPA ST2006C Stereo Microphone Kit Details
The DPA ST2006C is a complete DPA 2006C Stereo Pair with two handpicked omni microphones, selected on sensitivity within ±1.5 dB. As a small, lightweight and inconspicuous main AB stereo pair the 2006s deliver precise acoustic fingerprint and true tone. Meeting classic architecture and installation requirements, the 2006C?s can be mounted, hung or concealed to create clean, transparent recordings.

The foam design in the heavy-duty transportation box allows for fast and easy exchange of microphone/accessory inlays.
Included in this kit

DPA ST2006C Stereo Microphone Kit Features

  • Sensitivity selected pair
  • Compact size and authentic sound
  • Full-bodied sound from a small-bodied mic
  • PeliTM Case transportation and protection
DPA ST2006C Stereo Microphone Kit Includes
  • Two carefully matched 2006C omni microphones
  • sturdy PeliTM case
  • holders
  • windscreens

DPA 2006C Twin Diaphragm Omnidirectional Microphone Specifications

  • Directional pattern: Omnidirectional
  • Principle of operation: Pressure
  • Cartridge type: Pre-polarized condenser, Twin Diaphragm Capsule
  • Frequency range: 20 Hz to 20 kHz
  • Frequency range, ± 2 dB: 50 Hz to 20 kHz with typ. 3 dB soft boost at 14 kHz
  • Sensitivity, nominal, ± 2 dB at 1 kHz: 40 mV/Pa; -28 dB re. 1 V/Pa
  • Equivalent noise level, A-weighted: Typ. 16 dB(A) re. 20 µPa (max. 18 dB(A))
  • Equivalent noise level, ITU-R BS.468-4: Typ. 28 dB (max. 30 dB)
  • S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL): Typ. 78 dB(A)
  • Total Harmonic Distortion (THD) at 1 kHz: < 1 % up to 130 dB SPL peak
  • Dynamic range: Typ. 114 dB
  • Max. SPL, peak before clipping: 134 dB
  • Minimum load impedance: 2 kohm
  • Output impedance: < 200 ohm
  • Cable drive capability: 100 m (328 ft)
  • Output balance principle: Impedance balancing with Active Drive
  • Common Mode Rejection Ratio (CMRR): > 50 dB
  • Power supply (for full specifications): 48 V Phantom power (± 4 V)
  • Current consumption: 2.8 mA
  • Connector: XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase
  • Color: Matte black
  • Microphone weight: 60 g (2.1 oz)
  • Microphone diameter: 19 mm (0.75 in)
  • Microphone length: 58 mm (2.3 in)
  • Output voltage, RMS: > 4 V
  • Polarity: +V at Pin 2 for positive sound pressure
  • Temperature range: -40 °C to 45 °C (-40 °F to 113 °F)
  • Relative Humidity (RH): Up to 90%


You may also need...
DPA UA0836 Stereo Boom with Holders DPA UA0897 Shock Mount DPA UA0837 Stereo Boom DPA DUA0019 Spacer for Stereo Boom
Our Price: $759.95

Add
Our Price: $340.00

Add
Our Price: $569.95

Add
Our Price: $30.00

Add
DPA UA0836 DPA UA0897 DPA UA0837 DPA DUA0019