Rupert Neve Portico 517 500-Series Preamp/DI/Compressor Details
The Rupert Neve Designs 517 500-Series Preamp/DI/Compressor is based on the Portico 5017 Mobile Pre and provides the user with a world class, transformer-coupled preamp, compressor and DI circuitry. All of these come with with Vari-phase, Silk and DI/mic blending capabilities in a 500 series model. As the first 500 series module designed by Mr. Rupert Neve, the 517 incorporates outstanding sonic quality with an indispensable feature set.
Mic Pre and Instrument Amplifier
The 517′s mic pre includes 66dB gain, and is based on the Portico 5017 design. The mic pre also incorporates a polarity reverse switch and phantom power. The separate instrument amplifier includes 30dB of gain, a ground lift, variable phase and an instrument Thru connection.
Used as a single channel device for instruments, the 517 can be used to phase align, combine and compress direct and amplified signals. To achieve this, use the DI for the instrument’s direct signal and the mic preamp for the speaker cabinet signal. The blend control is used for mixing direct and amplified signals to achieve the desired tonal blend between the two sources, and the variphase is used to minimize or extenuate phase cancellations between the two signals. To compress the blended signal, the internal compressor jumper must be set to the blend path (this is the default setting). This technique could also be used to create a single, mixed output of a guitar and vocals.
Based around a new LDR (light dependent resister) design, the 517′s opto-coupler compressor has been simplified to a single threshold control with auto make up gain. By default, the compressor is set to a fixed 2:1 ratio with fixed attack and release. To set the compressor, simply dial the threshold control down until the desired amount of compression is achieved. An LED light indicates when the compressor is active.
In addition to the standard polarity reverse, the 517′s vari-phase control may be used to adjust phase incrementally. This control is useful any time two signals derived from the same source are combined.
For instance, even with careful placement, the combination of close mic-ed drums and overheads, can often yield hollow sounding results. By using the variable phase adjust, the direct signal can be phase rotated until the signals are naturally aligned.
This technique is also extremely useful when combined with the internal blend control on instruments. A bassist, using both direct and miced signals can blend the two into a single output, using the vari-phase to reach an optimal alignment. By adjusting the phase in the 517, the musician or engineer can find the absolute best mic position without regard to the phase relation to the direct signal.
Rupert Neve Portico 517 500-Series Preamp/DI/Compressor Features
- Silk: Much could be written about this feature, suffice to say, that it gives a subtle option to enhance sound quality in the direction of vintage modules. The silk button reduces negative feedback and adjusts the frequency spectrum to provide a very sweet and musical performance. We suggest you try it and make your own judgment.
- Mic Gain: Mic gain is from 0dB to 66dB. Overall gain to restore the apparent program level
- DI Gain: DI Gain is from 0dB to 30dB
- DI input: Balanced or unbalanced Hi-Z input for instruments
- Phantom power: Provides 48v phantom power to microphones. Controlled by the 48V switch.
- Polarity reverse: Reverses the polarity of the mic input
- Threshold: When signals exceed the "threshold" level, the gain is reduced at a controlled 2:1 ratio, with fixed attack and release time constants.
- Indicators: Indicators on the 517 denote signal presence and clipping on both DI and mic signals, as well as compressor activation.
Rupert Neve Portico 517 500-Series Preamp/DI/Compressor Specifications
- Frequency Response: Main Output, no load, –0.2 dB @ 10 Hz –3 dB @ 160 kHz
- Noise: Measured at Main Output, unweighted, 22Hz-22kHz, Terminated 150 Ohms. With gain at unity better than –100 dBu With gain at 66 dB better than –62 dBu Equivalent Input Noise better than –128 dBu Noise Factor 1.5dB
- Maximum Output Level: Maximum output from 20 Hz to 40 kHz is +23 dBu.
- Total Harmonic Distortion and Noise: @ 1kHz, +20 dBu output: Main Output: Better than 0.001% @ 20Hz, +20 dBu output: Main Output: Better than 0.002% Silk Engaged: Better than 0.2% Second harmonic
- Crosstalk: Measured channel to channel: Better than –90 dB @ 15kHz.
- Phantom Power: +48 Volts DC +/- 1%
What We Think - Rupert Neve Portico 517 Review
"The Rupert Neve Designs 5017 got us excited. But for folks who already have a wad of gear or who want to amass a well designed studio, the bedroom-studio form-factor of the 5017 doesn't really lend itself to that endeavor. But now with the Rupert Neve Designs 517, one can easily add modules to their 500-series power-supply at their own pace. Personally, I love the RND gear. The preamp is solid and very classy sounding. The compressor is excellent and very musical. I love that the line is something new and is a nice manifestation of the marriage of technical perfection and the musicality of technology. Not only are some of the greatest minds of the audio world designing for Rupert Neve Designs (Rupert Neve himself and Craig 'Hutch' Hutchison [formerly of Manley Labs], but they are approaching professional audio without the wastefulness of yesteryear. Truly a company to admire."
Alan Moon - Front End Audio
Click here to view all Rupert Neve products