Home > Mic Accessories > Clips, Clamps and Mounts >

  Oktava Figure 8 Adapter (Silver)


Oktava Mount Adpater


 
List Price: $250.00
Our Price: $195.00
You save $55.00!
 
 


Availability: Usually Ships in 24 Hours
Product Code: 9999-07823

 

Oktava Figure 8 Adapter (Silver) Details

The Oktava Figure 8 Adapter is a new head for MK-012 preamplifier with figure-of-eight directional characteristic. One of these is a fantastic accessory for a stereo set. Just put a cardioid capsule on the other MK-012 for Mid/Side (M/S) recording.

Oktava Figure 8 Adapter (Silver) Specifications

  • Mic type: Small diaphragm condenser
  • Polar Pattern: Figure-of-eight
  • Freq. Response: 20-20000Hz
  • Phantom voltage required: 48 +\- 2V
  • Full impedance, module: 200 ohms
  • Weighted SPL (ref. DIN 45412): 18 dBA
  • Maximum SPL in 250-8000Hz range, (less than 0.5% THD): 120 db
  • Free field sensitivity at 1KHz: 8 mV/Pa
  • Recommended load impedance: >1000 ohms

Click here to view all Oktava products


Accessories for this product...
Oktava MK-012-32 Multi-Capsule Microphone Set Oktava MK-012-30 Multi-Capsule Microphone Set Oktava MK-012-20 Muli-Capsule Condenser Microphone Oktava MK-012-02 MSP4 Condenser Microphones
Our Price: $800.00

Add
Our Price: $675.00

Add
Our Price: $625.00

Add
Our Price: $685.00

Add
Oktava MK-012-20 Oktava MK-012-02 MSP4 Matched Pair Condenser Microphones (Silver)
Oktava MK-012 MSP6 Factory Matched Microphone Set Oktava MK-012-20 Factory Matched Microphones Oktava MK-012-10 Factory Matched Microphones Oktava MK-012-01 MSP2 Factory Matched Pair
Our Price: $795.00

Add
Our Price: $1,250.00

Add
Our Price: $1,250.00

Add
Our Price: $575.00

Add
Oktava MK-012 MSP6 Oktava MK-012-20 Oktava MK-012-10 Oktava MK-012-01
Oktava MK-012-10 Muli-Capsule Microphone Oktava SM-MSR Shockmount
Our Price: $625.00

Add
Our Price: $75.00

Add
Oktava MK-012-10




Average Customer Review:
5 of 5
| Total Reviews: 2 Write a review.



  0 of 0 people found the following review helpful:
 
Great adapter, cardiod capsules NOT included May 12, 2013
Reviewer: Do Peterson from Seattle, WA United States  
Was surprised when I optimistically assumed that I would be able to screw this adapter by itself on to my mk012 pre-amp for a fig 8 pattern.  Additionally, two cardiod capsules (fortunately I had them) which screw into the adapter are needed.  That said, I love the sound, dramatic rejection on the sides, crisp and present on front or back.  My fav use: close micing percussion while capturing room ambience.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
Fun add on November 16, 2012
Reviewer: eoats from San Francisco, CA United States  
As I do a lot of odd effects & Foley recording around the house, mainly mono. this gives me a stereo image available to me on the occasion when I want. Easier than setting up an omni with my hper-cardoid

Was this review helpful to you?